BigTimeClocks XL-46-R-100 User Manual

BIGTIMECLOCKS
MODEL #XL-46-R-100
2020 USER'S MANUAL

1. GENERAL INSTRUCTIONS

• Use remote control keys to select function.(clock, countdown/up, interval timer, date display).
• Press EDIT key to setup function,
Use the left/right arrow keys and number keys to set target time. (Left/right arrow keys to navigate between
blinking digits to be set, number keys to set the target time).
• Press EDIT key again to exit with saved setting. Or EXIT key to exit without saving.
MEMORY KEYS: After setting a function value, press a number key (number key 0-9) to assign the function to a
particular number key for direct recall if desired. Users can define preset values for countdown, count up,and interval
timer functions.

2. NORMAL CLOCK

• PRESS CLOCK key to display time. (HH:MM:SS format is the default display).
• Display 12-hour or 24-hour (military time) format by pressing 12Hrs or 24Hrs keys.
• Press EDIT key to enter setting mode and press EDIT key a second time to save and exit setting.

3. COUNTDOWN TIMER

• Press to enter countdown timer mode and timer will display HH:MM:SS "99 59: 59".
• Set the target countdown time by arrows & number keys following the general setting instructions above.
• Press OK to start, stop, or to resume the timer function.

4. COUNT UP TIMER

• Press to enter count up timer mode and timer will display "00:00 00".
• Set the target count up time by using the arrows & number keys following the general setting instructions
above.
• Press OK to start, stop, or to resume the timer function.

5. STOPWATCH

• Press key to enter the stopwatch function and the timer displays "F3 00 00".
• Press OK to start, stop, or to resume the stopwatch timer.
®
1-702 726-9030
info@bigtimeclocks.biz
www.bigtimeclocks.biz
Page ! of ! 1 3