Page 1
Installation Guide Digital Box What’s included: AccessTV box: coax, HDMI Universal remote Coax splitter Coax cable HDMI cable Power cord and power cables go into here. x2 AA batters included (Optional) Step 1: Plug in and power up. Connect the coax cable to the cable in/RF in port on your TV box and to the cable outlet.
Page 2
TV is selected, the TV will display NO SIGNAL Make sure your TV and set-top box are both turned on. Once the digital box is powered on, the box will begin to load. This process can take between 2 to 30 minutes depending on your digital box model.