Pre-Installation; Planning Installation; Tools Required; Hardware Included - HAMPTON BAY 54643141 Use And Care Manual

Pre-Installation

PLANNING INSTALLATION

WARNING: Shut off power at the circuit breaker or fuse
panel before removing the old fixture.
The fixture may not be compatible with all dimmers. If you are unfamiliar with electrical installations, we
recommend you have a qualified electrician do your installation.
Remove the existing fixture. Make yourself a sketch of how the current fixture is wired (by wire color) or mark the
wires with masking tape and a pencil so you will know how to reconnect the wires to your new LED fixture.
This fixture does not use a mounting bracket to secure it to the electrical box. Instead, it is secured to the box by
the included screws specifically designed to ground the pan to a metal electrical box. For safe operation, use only
the electrical box screws included in the hardware kit. Screw them into the electrical box until there is about 3/8
in. between the ceiling and the underside of the screw head.
PRODUCT DESCRIPTION AND CHARACTERISTICS
LED ceiling light can be directly mounted to the household ceiling and requires little space. It is energy-saving,
environmentally friendly, and used for emitting soft and even distribution of light.
NOTE: Keep your receipt and these
instructions for proof of purchase.

TOOLS REQUIRED

Wire
Strippers
Flathead
Screwdriver

HARDWARE INCLUDED

NOTE: Hardware not shown to
actual size.
AA
Part Description
AA Wirenut (in parts bag)
BB Mounting Screw (1 in.)
Safety
Goggles
Phillips
Screwdriver
BB
Quantity
3
2
3
Please contact 1-855-HD-HAMPTON for further assistance.
Ladder
Electrical
Tape
HAMPTONBAY.COM
Gloves
Wire
Cutters