Biostar A68N-2100E Bios User Manual page 10

ACPI Settings/WakeUp Event control
Restore AC Power Loss
The item specify what state to go to when power is re-applied after a power failure.
Options: Power Off (Default) / Power On / Last State
ErP Control
This item enables or disables ErP Control. When ErP Enabled, system meets ErP requirment. All
wake up events do not work except Power Button after power down system(S5).
Options: Disabled (Default) / Enabled
ACPI Sleep State
This item select ACPI sleep state the system will enter when the SUSPEND button is pressed.
Options: S3 (Suspend to RAM) (Default) / Suspend Disabled
PME Wake up from S5
The item enables the system to wake from S5 using PME event.
Options: Disabled (Default) / Enabled
Wake system with Fixed Time
This item enables or disables the system to wake on by alarm event. When this item is enabled,
the system will wake on the hr::min::sec specified.
Options: Disabled (Default) / Enabled
Wake up date
You can choose which date the system will boot up.
Wake up hour / Wake up minute / Wake up second
You can choose the system boot up time, input hour, minute and second to specify.
PS2 Keyboard PowerOn
This item allows you to control the keyboard power on function.
Options: Disabled (Default) / Any Key / Stroke Key / Specific Key
Stroke Keys
This item will show only when Keyboard PowerOn is set "Stroke Key."
Options: Wake Key (Default) / Power Key / Ctrl+F1 / Ctrl+F2 / Ctrl+F3 / Ctrl +F4 / Ctrl+F5 / Ctrl+F6
10 | 2. Advanced Menu