Information marked with this symbol indicates that the • Never insert any objects or limbs into the device. instructions must be observed. • Do not cover or transport the device during operation. • Do not sit on the device. Ozone generator Airozon 60000...
Page 3
• Observe the technical data when selecting extensions to present concentration by means of an ozone meter the power cable. Completely unroll the extension cable. available for purchase from Trotec (Oz-One) or in a Avoid electrical overload. specialist shop. Wear a respirator mask with ozone filter.
Ozone is further generated during certain industrial processes. Ozone generator Airozon 60000...
Page 5
Late complications can include nosebleeds, a bronchitis (or tracheitis) or a pulmonary oedema. But the transition from irritations without lasting consequences to long-term changes with pathological significance is very smooth. Ozone generator Airozon 60000...
• Make sure the device is only placed on firm, dry and vibration-free ground. • Position the device as close as possible to the centre of the room to ensure an optimum air circulation. • When positioning the device, keep a sufficient distance to heat sources. Ozone generator Airozon 60000...
1. Press the on/off (6)button to switch the device on. ð The operating control lamp (9) is illuminated. 2. Press the on/off switch (6) again to switch the device off. Ozone generator Airozon 60000...
Page 8
This function 5. Connect the power cable and insert the mains plug into a is intended for operating the device with an external timer (e.g.: properly secured mains socket located outside of the room Trotec Zerozon 200). to be cleaned. Ozone generator Airozon 60000...
Amino acids / proteins with Designation Article number nitrogen and sulphur (vomit) Attachment hood for hose 6.100.007.061 Please contact the Trotec customer service if you like to use the connection device for disinfection purposes. Oz-One (ozone meter) 3.510.006.110 Zerozone 200 1.180.000.019 Prefilter F7 7.160.000.449...
(see device is not starting, have the electrics checked by a Shutdown chapter) to make sure that the ozone specialist company or by Trotec. concentration has fallen below the stipulated value The device is very loud: before performing maintenance and cleaning work.
(depth x width x height) Weight 59 kg 4. Insert a new air filter into the device. Minimum distance to walls and other objects: top (A): 50 cm rear (B): 50 cm sides (C): 50 cm front (D): 50 cm Ozone generator Airozon 60000...
Page 14
Hexagon screw (DIN 933 – M 10 x 35) Cover for maintenance work Screw (N_933_.changed) Filter box Saddle washer 1-phase fan Washer (Ø22 x Ø5.3 x H6mm, black) Handle Washer (DIN 9021 – Ø5.3xØ15x1.2) Air flap cover Hexagon nut (DIN 934 – M 5) Protective plate Air filter Ozone generator Airozon 60000...
Page 15
Note: The position numbers of the spare parts differ from those describing the positions of the components mentioned in these instructions. Hexagon screw (DIN 933 – M 10 x 25) Spacer sleeve (Ø5.3xØ10xL8) Hexagon socket countersunk screw Finger protection (78129-2-4039 (DIN 7991 – M 4 x 20) D=210) Fan (K3G250AT3972) Self-adhesive cellular rubber sealing tape (w/h=19/2mm, l=1520mm) Ozone generator Airozon 60000...
Page 16
Slotted set screw with cup point (DIN 916 – M 4 x 12) Feed-through terminal (FRK 2.5-4A GNYE) Screw (Liko cross recessed raised cheese head screw DIN 7985 – M 3 x 16, V2A) End stop (ZES35-2, screwless) Screw (Liko cross, DIN 7985 – M 4 x 8) Finder relay (80.11.0.240.0000) Ozone generator Airozon 60000...
The Section A addresses can be obtained from your municipality or local Herewith, we – Trotec GmbH– declare that the machinery administration. For further return options provided by us please designated below was developed, constructed and produced in refer to our website https://de.trotec.com/shop/.