Advertisement
ASSEMBLY AND LIGHTING INSTRUCTIONS
WARNING
any sharp edges. However, you should handle all
components with care to avoid accidental injury.
Please read all instructions thoroughly before proceeding.
Find a large, clean area in which to assemble your
LIFE SMART 17" Griddle. Please refer to the assembly
diagram as necessary.
NOTICE: Make sure all the plastic protection and
packaging is removed before assembling
PARTS LIST
(4) Adjustable Height Feet
•
Oil Drip Tray
•
STEP 3
Screw in the LP bottle into the gas regulator, turning the
tank clockwise.
The LP bottle should look like the picture below when
properly connected to the regulator.
Main Body
•
Regulator
•
STEP 1
Remove the four adjustable height feet and regulator from
the packaging and place on a flat soft surface upside down.
Attach the four adjustable height legs to the bottom of the grill.
Make sure to only use a 3.8 x 7.8inch, 16.4oz Propane
bottle. The LP bottle to be used must be constructed
LP bottles, U.S. Department of Transportation (DOT) or
the Standard for Cylinders, Spheres and Tubes for the
Transportation of Dangerous Goods, CAN/CSA-B339.
The LP bottle must be disconnected when the griddle is
not in use. Only cylinders marked "propane" may be used.
The LP bottle must be positioned for vapor withdrawal.
1. Do not store a spare LP gas cylinder under or near
this appliance;
2.
If the instructions in 1) and 2) are not followed exactly, a
7
Advertisement
