GREISINGER GDUSB 1000 Installation And Operating Manual
  1. Manuals
  2. Brands
  3. GREISINGER Manuals
  4. Adapter
  5. GDUSB 1000
  6. Installation and operating manual

GREISINGER GDUSB 1000 Installation And Operating Manual

Universal interface adapter for gmsd/gmxd-sensors
Hide thumbs Also See for GDUSB 1000:
Table of Contents

Advertisement

Quick Links

Download this manual
S56.0.01.6C-04
Installation- and operating manual
1 General
The GDUSB1000-adaptor makes it possible to connect a standard pressure sensor of the type
GMSD/GMXD directly to the USB-port of a personal computer. Two operation modes are available:
Standard-mode: (Master-Slave)
In this mode the GDUSB1000 acts like a portable measuring instrument of the GMH3xxx-series and
gives back the wanted measurement on request (measurand, maximum or minimum data).
The communication can occur with the standard GMH/EASYBUS-software (e.g. EBS9M) and offers the
possibility to monitor long-run measurements of pressure for example.
Fast-mode: (autom. sending)
In this operating mode after a fulfilled trigger condition the GDUSB1000 sends the measuring data
automatically in the adjusted cycle time.
This mode is especially adapted for the analysis of pressure curves and the survey of pressure peaks
(with pre-trigger)
GREISINGER
D - 93128 Regenstauf, Hans-Sachs-Straße 26
Tel.: +49 9402 / 9383-0, Fax: +49 9402 / 9383-33, www.greisinger.de
GDUSB 1000
Universal interface adapter for
GMSD/GMxD-sensors
electronic GmbH
page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GDUSB 1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GREISINGER GDUSB 1000

Summary of Contents for GREISINGER GDUSB 1000

  • Page 1 This mode is especially adapted for the analysis of pressure curves and the survey of pressure peaks (with pre-trigger) GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 Tel.: +49 9402 / 9383-0, Fax: +49 9402 / 9383-33, www.greisinger.de...

  • Page 2: Table Of Contents

    S56.0.01.6C-04 page 2 of 7 Index GENERAL ............................1 SAFETY REGULATIONS ........................ 2 SPECIFICATION ..........................3 DISPOSAL INSTRUCTIONS ......................3 OPERATING MODES ........................4 Standard - Mode ........................4 Fast - Mode ..........................4 GENERAL HANDLING INSTRUCTIONS ..................5 To connect/change sensors....................... 5 Altitude correction of the absolute pressure sensor ..............

  • Page 3: Specification

    S56.0.01.6C-04 page 3 of 7 5. The device must be switched off and must be marked against using again, in case of obvious mal- functions of the device which are e.g.: - visible damage - no prescripted working of the device - storing the device under inappropriate conditions for longer time When not sure, the device should be sent to the manufacturer for repairing or servicing.

  • Page 4: Operating Modes

    S56.0.01.6C-04 page 4 of 7 5 Operating modes After restart the adapter is in the standard-mode. 5.1 Standard - Mode In this mode the GDUSB1000 acts like a portable measuring instrument of the GMH3xxx-series. It gives back the wanted measurement on request. For this purpose 4 measuring channels are allocated at the adresses 1 –...

  • Page 5: General Handling Instructions

    S56.0.01.6C-04 page 5 of 7 6 General handling instructions 6.1 To connect/change sensors Only sensors of the GMSD or GMXD-serial are allowed to be used! If other sensors are used the adapter and the sensor may be destroyed. To change the sensor you have to disconnect the adapter. Sensors have to be connected before acti- vating the adapter.

  • Page 6: Driver Installation

    S56.0.01.6C-04 page 6 of 7 7 Driver Installation 7.1 Windows Vista™, Windows XP and Windows 2000 For installation of the device drivers a user account with an administrator-authorisation is required. If you haven’t an appropriate authorisation please consult your system administrator. •...

  • Page 7: Frequently Asked Questions (Faq)

    S56.0.01.6C-04 page 7 of 7 8 Frequently asked questions (FAQ) 8.1 How to check whether the adaptor has been installed correctly and via which COM- port can I approach the installed adaptor? Start the Device-Manager: start \ settings \ control panel \ performance and maintenance \ system \ hard- ware and open the submenu “Ports (COM &...
  • Page 8 G38.0.01.6C-04 Operating Manual Windows™ - Operating Software GSOFT_USB for USB measuring adapter GDUSB1000 as of version 1.3 Contents: General Information ________________________________________________________________ 2 Software Operation _____________________________________________________________________ 2 Software License Agreement ______________________________________________________________ 2 Software Registration ___________________________________________________________________ 2 System Requirements____________________________________________________________________ 2 Software Installation ____________________________________________________________________ 2 Operating Software GSOFT_USB _____________________________________________________ 3 Screen Elements ________________________________________________________________________ 3 2.1.1...

  • Page 9: General Information

    G38.0.01.6C-04 GSOFT_USB – Operating Manual page 2 of 7 1 General Information 1.1 Software Operation This operating manual postulates basic knowledge of how to handle a personal computer with the operating system Windows™. If this is not existent it is recommended to make oneself familiar with the main features of Windows™ before installing this software (operating manuals, specialised literature, introductory courses etc.).

  • Page 10: Operating Software Gsoft_Usb

    G38.0.01.6C-04 GSOFT_USB – Operating Manual page 3 of 7 2 Operating Software GSOFT_USB GSOFT_USB permits the handling of an USB measuring adapter of the GDUSB1000 series. This adapter enables a direct connection of a standard pressure sensor of the type GMSD/GMXD to the USB-interface of a personal com- puter.

  • Page 11: Sensor Data Window

    G38.0.01.6C-04 GSOFT_USB – Operating Manual page 4 of 7 2.2.2 Sensor Data Window register “data“ register “comment“ register “instrument“ register “extras“ measurements table current status of the re- cording; start-/stop-condition number of data sets and period of recording 2.2.3 Start Recording When recordings are restarted, all data which have been recorded until that moment will be deleted!! If necessary read in and save important information or save the data on demand before a measurement- restart!

  • Page 12: Reading In Of Measurements

    G38.0.01.6C-04 GSOFT_USB – Operating Manual page 5 of 7 Choice of the recording mode: Output: Cycle time: here you can decide in which intervals measuring points should be recorded. At the same time you can select which value will be displayed (measured value, min/max peak). Keep this in mind: at a cycle time of more or equal than 5ms all measured values will be selected automatically.

  • Page 13: Measurement Diagrams

    G38.0.01.6C-04 GSOFT_USB – Operating Manual page 6 of 7 2.3 Measurement Diagrams The loaded data of the measuring windows can also be displayed in diagrams. Select for this „Create new diagram“ in the menu point „Diagram“. Then a selection of all possible graphs will be displayed. Select the desired graphs and acknowledge your selection by pressing ‘Ok’.

  • Page 14: File Operation

    G38.0.01.6C-04 GSOFT_USB – Operating Manual page 7 of 7 2.4 File Operation If you have saved data by selecting menu „file“ function “save“ or “save as“ you can re-load them at any time into the program to see the data or to analyse them. In that case please select “File / open...“...

Table of Contents