Advertisement
B&W Custom Truck Beds, Inc. warrants each new hitch, to the original purchaser thereof, to be free from defects in
workmanship and materials when operated under normal conditions and maintained properly, excluding chrome,
painted, or any other finishes.
This warranty shall be in effect for a period of 1 year from date of purchase. This shall be in lieu of any other warranty,
expressed or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular
purpose. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.
B&W Custom Truck Beds, Inc. will repair or replace at its option and without cost to the original purchaser, any hitch
that has been found to be defective and is within the period of warranty. All freight to and from the factory is to be
paid by the customer. The Factory address is: 1216 Hwy 224, Humboldt, KS 66748.
The liability of B&W Custom Truck Beds, Inc. under this warranty shall be limited solely to repair or replacement of the
hitch within the warranty period; and B&W Custom Truck Beds, Inc. shall not be liable, under any circumstances, for
consequential or incidental damages, including, but not limited to, personal injury or labor costs. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. This warranty gives the original purchaser specific legal rights and you may also have other rights
which vary from state to state.
Under no circumstances will B&W Custom Truck Beds, Inc. be responsible for any expense in connection with any
repairs made by anyone other than the factory or authorized service station unless such repairs have been specifically
authorized in writing by B&W Custom Truck Beds, Inc.
Care Instructions
Make sure that you follow these care instructions when using your hitch.
1. Lubricate hitch receiver and receiver tube on hitch with a petroleum or Teflon base lubricant, before installing.
2. Be sure to lubricate the holes in the hitch with petroleum or Teflon base lubricant monthly or more often if needed.
3. Always keep your hitch clean and free from grit, salt, and road grime.
4. In some states it may be necessary to spray the entire hitch with a petroleum or Teflon base lubricant to help protect
from wet or salty conditions.
5. Before towing with your hitch, be sure to check that all pins and cotter pins are in place and secure.
6. Never exceed the tow rating of your hitch, ball or vehicle.
For Part Numbers TS10055 and TS10056
Pintle 11 11 2011
Advertisement
