Advertisement
Lippert Components, Inc. Informational Publication
LINC WIRELESS TOUCH SCREEN REMOTE - IDS
1.
Turn the remote on by pressing and releasing the large silver
button at the bottom of the unit (Figure 1); P.1.
2.
Press the "OK" button on the touch screen to access the Function
Menu (Figure 7). The first page of the Function Menu has buttons
for the security light and functions 1-3. Functions 4-7 are located
on the second page of the menu and can be accessed by pressing
on the "Next button at the top of the screen (Figure 8). The
function buttons correspond to the same names as the functions
selected during configuration. Most screens will have left and
right arrow buttons at the bottom of the screen. The left button
will retract the slide or awning. The right button will extend the
slide or awning. Press and hold either button until the item is fully
retracted or extended. The icon at the top of the screen will
animate to show the action (Figures 9 and 10). Otherwise, the
button will state its function (Figure 11).
3.
After the desired operations are complete, the remote can be
powered down by pressing and holding the large silver button at
the bottom of the unit or will automatically turn itself off after 2
minutes of non-use.
Fig. 12
Remote Operation Instructions
LIP Sheet - 0205 revB
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Advertisement
