Advertisement
OR-
1. Loosen the top vest straps all the way
1
3. Place the harness on your hips,
fasten the main buckle around your
wasit and pull the straps to tighten
3
9
NOTE: You can use the trigger to play with
the spine height while you work in order to shift
the weight distribution from shoulders to hips
www.ORCAbags.com
Sound Bag Harness Setup Instructions
1
1
2
3
6. Connect the top aluminum ring to the front connection on your mixer case
NOTE: We recommend connecting it as far as possible from your body
6
7. Connect the bottom aluminum ring to the front or rear D ring on your mixer case
NOTE: We recommend connecting it as far as possible from your body
7
8
Top Vest
Spine
Waist Belt
4. Push and rotate the two round buckles
to put more pressure on your hips
4
8. Push the trigger to release the spine
9. Bend forward to lengthen the spine and shift the weight onto your hips,
then release the trigger to lock the spine in the desired position
10. Adjust the straps on the top vest
these should be comfortable, not tight
11. Adjust the straps on the waist belt
these should be tight in order to
distribute the weight onto your hips
2. Pull out the round buckles
on the waist belt, then
loosen the straps all the way
2
5
5. Disconnect the top buckle
and roll up the top strap
NOTE: Use this strap only when
wearing the waist belt by itself
10
1
1
1
11
Advertisement
