Sel -9524 Information Sheet

SEL-9524 GNSS Antenna
SEL
What's Included?
Antenna
/
Installation
The SEL-9524 GNSS Antenna can be mounted using an
SEL 915900043 Antenna Pipe Mounting Kit or
915900044 Antenna Surface Mounting Kit.

Pipe Mounting Instructions

Step I. Feed one end of LMR-400 or RG-8X
coaxial cable through the pipe and the
Pipe-Mount Adapter.
Step 2. Attach the end of the cable to your
antenna by using the TNC connector.
Step 3. Use the Pipe-Mount Adapter to attach the
antenna to the pipe.
Step 4. Mount the antenna in an area with a
clear, unobstructed view of the sky.
Information Sheet
Pipe-Mount
Adapter
Surface-Mount
Nuts
~
Pullman, Washington U.S.A.
Tel: +1.509.332.1890 • Fax: +1.509.332.7990 •
2015-2016 by Schweitzer Engineering laboratories. Inc.• 20160225
@
Surface Mounting Instructions
Step I. Insert the antenna TNC connector
through the hole in the antenna surface
mounting bracket.
Step 2. Secure the antenna to the bracket by
using the two provided locking nuts.
Step 3. Connect the LRM-400 or RG8X cable to
the antenna's TNC connector.
Step 4. Mount the surface mounting bracket so
that the antenna has a clear, unobstructed
view of the sky.

Specifications

Constellations: GPS (SEL-9524A) or
GPS/GLONASS (SEL-9524B)
Frequency Band: 1575.42:t 2 MHz (SEL-9524A)
1570-1606 MHz (SEL-9524B)
>
LNAGain:
40 dB
Nominal Impedance: 50 ohms
Operating
Temperature: -50° to +85°C
Humidity: 95%
Connector: TNC female
Weather Protection:
IP68 when connected to a sealed
TNC connector

Compliance

Designed and manufactured under an ISO 9001
certified quality management system
C E:
EMC Directive, Low-Voltage Directive
Learn More
Please visit https://www.selinc.com/SEL-9524/
www.selinc.com • info@selinc.com