Light construction, petrol mini transporter (28 pages)
Summary of Contents for The Handy THLC09715
Page 1
ASSEMBLY REQUIRED – MINIMUM OF TWO PEOPLE Please read & understand this manual, paying particular attention to the safety instructions, before use. The manufacturer reserves the right to change the product specification and livery according to continued product improvements. THLC09715 - 193844002 12/05/2016...
CONTENTS GENERAL SAFETY INSTRUCTIONS SPECIFICATION COMPONENTS ASSEMBLY KNOW YOUR MACHINE FUEL SAFETY OPERATION SERVICE MAINTENANCE STORAGE TROUBLE SHOOTING PARTS DIAGRAM PARTS LIST WARRANTY EC DECLARATION OF CONFORMITY WE RECOMMEND Assembly Is Required This product requires assembly before use. See the “Assembly” section for instructions. Please check that all parts required for the assembly of this spreader are included.
GENERAL SAFETY INSTRUCTIONS Read and understand the owner’s manual and labels affixed to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product.
Page 5
STAY ALERT Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly. Do not use this machine when you are tired or distracted from the job at hand. Be aware of what you are doing at all times. Use common sense. AVOID DANGEROUS CONDITIONS Make sure there is adequate surrounding workspace.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. SPECIFICATION Model THLC09715 Product Number 193844002 Engine Briggs & Stratton CR950 Series Weight 179kg...
COMPONENTS The machine is supplied partially assembled from the Distributor. Ensure all the components are included in your package. If you believe you are missing or have received defective parts, please contact: Email: customerservice@handydistribution.co.uk Telephone: 01793 333212 (Mon to Fri – 8.00am to 5.30pm excl. Bank Holidays). Main Body, Handlebar Assembly, Tipping Handle, Tub, Instruction Manual, Hardware Bag...
ASSEMBLY Follow the below assembly instructions carefully, you should be able to assemble the machine in a short period. Mount the tipping handle on the right side of the box. Align the holes and fasten with two M8x35 hex bolts, four washers and two nuts. Align the holes of the handlebar with the mount bracket and secure each with a spring washer, flat washer and a M10x20 bolt.
Page 9
Position the bottom panel inside the mounting bracket. Align the holes with the mounting bracket. Insert a long pin through the holes and secure each side with a flat washer and cotter pin...
KNOW YOUR MACHINE ENGINE SWITCH The engine switch enables and disables the ignition system. The engine switch must be in the ON position for the engine to run. Turning the engine switch to the OFF position stops the engine. CLUTCH CONTROL LEVER Squeeze the control lever to engage the clutch.
RIGHT STEERING LEVER Operate the lever to turn right. GEAR SELECTION LEVER It controls forward or reverse movements of the machine. TIPPING HANDLE This controls the tipping of the dump box. Pull the handle up to release the dump box's locking device and raise the dump box.
OPERATION Never park the machine in a place with unstable ground which could give way, particularly when the dump box is full. Disengage the clutch lever before starting the engine. Start the engine carefully according to the instructions and with your feet well away from the moving parts.
Page 13
STARTING THE ENGINE A more detailed description of the engine operation and all related precautions and procedures can be found in the Engine Manual packed separately with the machine. Follow the procedure below for cold starts: 1. Turn the choke lever on the engine to the full choke position. 2.
IDLE SPEED Set the throttle control lever to its “SLOW” position to reduce stress on the engine when it is not in use. Lowering the engine speed to idle the engine will help extend the life of the engine, as well as conserve fuel and reduce the noise level of the machine.
Page 15
ADJUSTING THE CLUTCH As the clutch wears the lever action may become wider making it less comfortable to use. At this point you will need to adjust the cable, setting the clutch lever to its original position by adjusting the adjustment device and the counter-nut. ADJUSTING THE STEERING If you have difficulty steering the unit, you will need to adjust the steering levers with the special adjusters.
Page 16
5. Return the dump box to its original position. CAUTION The adjustment of the track and the brakes are linked, therefore be very careful because if the track is over- tightened, the braking effect will be lost. If the adjustment bolt cannot be adjusted any further, the tracks may have to be replaced.
STORAGE If the Transporter will not be used for a period longer than 30 days, follow the steps below to prepare your unit for storage. 1. Drain the fuel tank completely. Stored fuel containing ethanol or MTBE can start to go stale within 30 days.
TROUBLE SHOOTING Problem Cause Remedy 1. Attach the spark plug wire securely 1. Spark plug wire to the spark plug. disconnected. 2. Fill with clean, fresh petrol. 2. Out of fuel or stale fuel. 3. Throttle must be positioned at choke Engine fails to 3.
Page 22
GJ HANDY & CO LTD USER WARRANTY POLICY 1. Users Statement of Warranty Each new machine is warranted against defective material or assembly of material under normal usage. The warranty applies to the original purchaser and covers faulty parts and the labour involved in replacing and repairing those parts, which are of original manufacture.
Page 23
GJ HANDY & CO LTD USER WARRANTY POLICY 3. Not covered by this warranty The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident.
EC DECLARATION OF CONFORMITY We, Importer Handy Distribution, Murdock Road, Dorcan, Swindon, SN3 5HY Declare that the product Model: THLC09715 Product Number: 193744002 PETROL ALL TERRAIN MINI TRANSPORTER Complies with the following directives: Machinery Directive 2006/42/EC Annex 1 Relevant Standard(s), Specification(s) referred to:...
FOR SPARES OR SUPPORT OF YOUR HANDY PRODUCT, PLEASE CONTACT US: TEL: 01793 333212 (MON – FRI 8.00AM TO 5.30PM EXCL. BANK HOLIDAYS) EMAIL: customerservice@handydistribution.co.uk To see our complete range of garden machinery and equipment visit: www.thehandy.co.uk Distributed by Handy Distribution, Murdock Road, Dorcan, Swindon, SN3 5HY...
Need help?
Do you have a question about the THLC09715 and is the answer not in the manual?
Questions and answers