Preparation Before Use; Hair Removal - TECHWOOD TEP-40 Instruction Manual

1. Make sure the skin, to be treated, is clean, entirely dry and free from any
grease or cream.
2. Do not use any cream before waxing.
3. Hair removal is easier and more comfortable immediately after taking a bath or
shower. However, ensure that the skin, to be treated, is completely dry before you
start waxing.
4. After hair removal, apply a moisturizing cream or lotion to help reduce possible
skin irritation.
Set the switch to 0 and connect the adapter to the unit.
Plug into a power outlet in good condition.
The charge indicator lights up indicating that the unit is charging.
It takes about 8 hours to fully charge the device.
Note: To extend battery life, we recommend charging the unit after each use.
After charging, use the epilator according to description in the below paragraphs.
● Unroll the power cord completely.
● Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Never modify the appliance in anyway.
● It is possible to use the epilator with or without the power cord.
● If the battery is discharged, insert the plug into the jack (in the unit).
● Plug into a power outlet in good condition.
The design of the device allows rotating discs catch, even the shortest, hairs
and get them out by the root.
This epilator will leave skin smooth and hair-free for weeks.
Select speed 1 for areas where hair is short, when the bones are close to the skin,
such as knees and ankles, and the hard to reach areas.

PREPARATION BEFORE USE

CHARGE
USE

HAIR REMOVAL

8