Do you have a question about the S Series and is the answer not in the manual?
Questions and answers
Summary of Contents for Drain Master S Series
Page 1
● Chemical Type Oil-water Separator Subject to technical changes without prior notice, errors not excluded. ◆ Please read this manual before installation of DRAIN MASTER Edition : 09.2015 ◆ Functions of DRAIN MASTER are enabled properly only when the instructions herein are observed.
Green ▶ Electrical installation must be performed by qualified technician. DM-15HP Blue ▶ DRAIN MASTER S/HP is activated only when it is connected to power. Green ▶ Always use authentic components provided by the Company for replacement to be DM-50HP Blue 1.2 / 60...
FUNCTION INSTALLATION The condensate line must be installed separately. Fig.2 Fig.1 With linear pipe line, arrange the pipe Condensate through the feed line is accumulated in the housing. When the upper flow sensor detects the line so that condensate is separated condensate level and sends a signal with the electronic control device, the valve is activated to open the from air.
ELECTRICAL INSTALLATION MAINTENANCE Trouble shooting Factor Solution ※ The feed line or the discharge Check these lines. ▶ No discharge of condensate line is closed or blocked. with the Test button ※ Defective PCB Replace the PCB. ※ Defective solenoid valve Replace the solenoid valve.
Need help?
Do you have a question about the S Series and is the answer not in the manual?
Questions and answers