Steelcase Campfire Manual

December 2012
Deviation from the assembly instructions may result in a risk
of fire or electric shock.
To Reduce The Risk of Fire, use E27/E26 12V DC compact
fluorescent or LED Light bulb. Light bulb can be used as
long as the overall length does not exceed 113mm
To Reduce The Risk of Fire, Immediately remove any debris
in the lamp shade/diffuser assembly.
To Prevent Risk of Electrical Shock
1. All electrical installations must done by qualified personnel in accordance
with codes and regulations applicable at the installation site.
1. Before beginning work, ensure that the electrical power has been removed
from the circuits that are being connected to or disconnected from.
1. Ensure that circuits to which the lights are connected are properly grounded
and are the correct voltage.
1. To prevent wiring damage or abrasion, do not expose wiring to edges of
sheet metal or other sharp objects.
APPLICATION NOTE: Consult your local fire code authorities when
planning the use of this product in a building with sprinklers. Some
authorities may limit the use of the Big Lamp in close proximity to
sprinkler heads due to the large shade being an obstruction in the
sprinkler spray pattern.
Important Safety Instructions :
The big lamp equipped with Universal AC input and DC output adaptor with
changeable plug face. Never use with an extension cord unless plug can be
fully inserted. Do not alter the plug.
Campfire Big Lamp
Page 1 of 12