SKT 18665004 User Manual

20v 4pc cordless tool kit

Hide thumbs

Table of Contents

Quick Links

Download this manual

20V 4PC

CORDLESS TOOL KIT

User manual

SKU No.:18665004

Original Instructions.

CAUTION! Read the instructions before

using the machine.

Table of Contents

Need help?

Do you have a question about the 18665004 and is the answer not in the manual?

Questions and answers

Summary of Contents for SKT 18665004

Page 1 20V 4PC CORDLESS TOOL KIT User manual SKU No.:18665004 Original Instructions. CAUTION! Read the instructions before using the machine.
Page 2 Guarantee Thank you for investing in a SKT power tool. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing defects for a period of 36 months from the date of purchase. This guarantee does not affect your statutory rights. In case of any malfunction of your tool (failure, missing part, etc.),...
Page 3 Pack contents 1. Battery charger 2. 2x 20V Li-ion batteries 3. Cordless drill 4. Cordless impact driver 5. Cordless circular saw 6. Cordless reciprocating saw 7. Saw blades for reciprocating saw 8. Parallel guider for circular saw 9. Instruction manual(not illustrated)
Page 4 The drill and impact driver are The circular saw is designed for sawing in wood, the reciprocating saw is designed for sawing in wood, plastic, plaster and metal. this...
Page 5 hand...
Page 8: Battery And Battery Charger
BATTERY AND BATTERY CHARGER User manual Original Instructions. CAUTION! Read the instructions before using the machine.
Page 10 flammable when main main...
Page 12 main socket...
Page 13 main socket 18665-1 120VAC 60Hz 1.8A grounding. 18665-2 1500 1500...
Page 14 20V CORDLESS DRILL User manual MODEL NO.:LCD770-1S Original Instructions. CAUTION! Read the instructions before using the machine.
Page 18 To select drilling mode, rotate the torque control ring until the symbol lines up with the indicator mark (E)
Page 20 main socket LCD770-1S 0.8-10...
Page 22 20V CORDLESS IMPACT DRIVER User manual MODEL NO.: LCW770-1A Original Instructions. CAUTION! Read the instructions before using the machine.
Page 23 FEATURES 1. ¼" quick release chuck 2. Sleeve 3. Forward / reverse switch 4. Trigger and electronic speed control 5. LED worklight 6. Handle 7. Belt clip 8. Battery release button 9. Battery Safety instructions for the use of your cordless impact driver CAUTION •...
Page 24: Before Using The Machine
2. Before using the machine Fitting the belt clip The belt clip is factory fitted. For your convenience it can be fitted to either side of the driver. • Unscrew the Phillips screw. • Fit the belt clip to the other side of the machine.
Page 25: Using The Machine
3. Using the machine Forward / Reverse • Select the direction of rotation by pressing the forward/reverse switch (A). The forward / reverse switch has a lock function and cannot be used when the trigger is depressed. CAUTION: Ensure the driver has come to a complete stop before changing direction.
Page 26: Led Worklight
LED worklight The driver is equipped with an LED worklight that facilitates working in inaccessible, dark places. • g i l u l l immediately after pulling the trigger and turns off once you release the trigger. 4. Maintenance and cleaning Maintenance The driver is maintenenance-free but must be kept clean.
Page 27: Technical Specifications
Technical specifications 20V CORDLESS IMPACT DRIVER MODEL NUMBER LCW770-1 20 V Battery voltage Chuck size ¼" hexagonal (6.35mm) Torque max. 150 Nm No load speed 0 – 2200 rpm Impact rate 0 – 3000 bpm Protection category III...
Page 29 20V CORDLESS CIRCULAR SAW User manual MODEL NO.:LCC770-1 Original Instructions. CAUTION! Read the instructions before using the machine.
Page 30 20V Li-Ion Circular Saw with Laser FEATURES Trigger Trigger lock Cutting depth adjustment knob Cutting depth scale Blade housing Spindle lock button Flange screw Outer flange Mitre gauge 10. Parallel guide 11. 0° & 45° Cut markings 12. Blade guard Fixing knob for parallel guide 14.
Page 31: Cutting Procedures
Cutting procedures CAUTION a. DANGER: Keep hands away from the cutting area and the blade. Keep your second hand on the auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade. b.
Page 32 • If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator. Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.
Page 33: Depth Adjustment
make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut. not operating properly, they must be serviced before use. The lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris.
Page 34: Mitre Cuts
Mitre cuts The base plate can be tilted up to 45° to make angled cuts. Remove the battery from the saw to avoid the risk of unintentional starting! • • angle using the mitre gauge (D). The value shown on the gauge is approximate.
Page 35: Switching The Machine On And Off
4. Using the machine Before switching the machine on Caution! Carefully check the following points each time before operating the machine. 1. Ensure that the saw blade is securely fitted. 2. Make sure all fixing screws and clamping mechanisms are securely tightened.
Page 36 Handling the saw • for best results. • c t i l i t the machine has reached its full no load speed before engaging with the workpiece. • n i l Do not apply excess pressure. • t i s sawing.
Page 37: Changing The Saw Blade
4. Maintenance and cleaning The machine requires very little maintenance but must be kept clean and free of dust at all times. Pay particular attention to the ventilation slots and blow out using compressed air if necessary. Changing the saw blade Remove the battery from the saw before carrying out any maintenance or adjustments.
Page 38 • Retract the protective guard by hand and carefully remove the saw blade. • Clean the clamping arrangement and mount the replacement saw blade by following the above procedure in reverse order. Caution! The direction of the arrow on the saw blade must correspond to the direction of the arrow on the machine’s housing (12).
Page 39: Maintenance
Maintenance The contacts on the battery and the charger must be kept clean. All replacement parts must be replaced by a trained electrician or an authorised service centre unless stated otherwise in this manual. Lubrication The machine does not require additional lubrication. Cleaning •...
Page 41 20V CORDLESS RECIPROCATING SAW User manual MODEL NO.: LCR770-1 Original Instructions. CAUTION! Read the instructions before using the machine.
Page 42 FEATURES 1. Blade holder 2. Shoe Trigger Lock-off switch clamp release lever x Saw blades...
Page 43 Safety instructions for the use of your reciprocating saw CAUTION • Wear ear protection. • Wear a dust mask. • Wear protective goggles. • Only sharp blades that are suitable for the saw and in good condition may be used. Replace damaged blades immediately and never attempt to fit blades or other accessories that are not suitable for the saw.
Page 44 • Always allow the machine to come to a complete stop before putting it down. Never attempt to stop a moving blade by grasping it or by placing the moving blade in contact with any surface as to do so poses a risk of damage, breakage and/or injury.
Page 45: Removing The Saw Blade
• Open blade clamp release lever to its full open position. • s ’ holder. • • Removing the saw blade WARNING: Burn hazard. Do not touch the the blade immediately after use. Contact with the blade may result in personal injury. •...
Page 46 TRIGGER SWITCH • • To switch the tool on, press the lock off button (B), then squeeze the on/off switch (A). • Releasing the trigger turns the motor OFF. NOTE: This tool has no provision to lock the switch in the ON position, and should never be locked in the ON position by any other means.
Page 47 Sawing Caution • Wear safety goggles to protect your eyes from flying chips or dust. • Wear a dust mask. • When cutting metal wear protective gloves to protect your hands from hot flying chips. • Be sure to hold the saw’s shoe firmly against the workpiece while cutting.
Page 48 Plunge cutting Caution • Never perform plunge cuts into metal. • Take particular care when making plunge cuts into walls, floors or ceiling. Use a suitable detector to locate and avoid cables, pipes or cable conduits that may be hidden beneath the surface. Plunge cutting is only possible in softer materials such as softwood, plasterboard and polystyrene.
Page 49: Cleaning, Maintenance And Storage
4. Cleaning, maintenance and storage Cleaning • Clean the battery charger using a soft, dry cloth. Disconnect the charger from the main socket supply before cleaning. • Remove the battery before cleaning the tool. • Ensure that the ventilation slots are not blocked and clean the machine’s housing regularly with a soft cloth.
Page 50 Technical specifications 20V LI-ION CORDLESS RECIPROCATING SAW MODEL NUMBER LCR770-1 Battery voltage 20 V No load speed 0 – 3,000 strokes/min Max cutting depth Wood: 115 mm Metal: 10 mm Protection category III...