Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FLEMING TOP3
Summary of Contents for FLEMING TOP3
- Page 1 INLINE or SEMI-OFF SET 3’, 4’, 5’ & 6’ PASTURE TOPPERS Operators Manual & Parts List Fleming Agri-Products Ltd Newbuildings Industrial Estate Newbuildings Northern Ireland BT47 2SX Tel: (028) 7134 2637 Fax: (028) 7134 4735 Email:info@fleming-agri.co.uk ‘Quality, Strength & Personal Service’...
-
Page 2: Authorised Operators
1.1 FUNDAMENTAL PRECAUTIONS On delivery, your dealer gave you an explanation of the operation and maintenance of this Fleming topper. Please read and understand these operating instructions before operating the machine for the first time. It is essential that you observe all safety instructions. -
Page 3: General Safety And Accident Prevention Regulations
NEVER attach to a tractor which would be rendered unstable when the implement is operated at its full ca- pacity. Take note of the maximum load permissible on the linkage. The weights of the various models are given in the table below. Model Weight TOP3 130 kg TOP4 202 kg TOP5... -
Page 4: Maintenance
Regularly check that blades are kept sharp and free from damage. Replace if any damage is apparent. When replacing the blades ensure only the correct FLEMING blades are used. Blades should be replaced in pairs to ensure that the rotor remains balanced. ALWAYS replace the blade bolts with new genuine Fleming bolts when the blades are changed. -
Page 5: Initial Assembly
1.6 INITIAL ASSEMBLY Remove all components from the bag which was attached to the machine on delivery. Slacken the bolts which attach the A frame to the frame of the topper, reposition the A frame into a vertical position and retighten the bolts. Attach the large D-shackle to the eye on the back of the A frame. - Page 7 Rotor maintenance The rotor should be checked after the first 10 hours, the first 50 hours, and the first 100 hours of use. The rotor should then be checked periodically to ensure it has remained tight. 1) Ensure PTO is turned off completely. Remove key from ignition.
-
Page 8: Eu Certificate Of Conformity
EU CERTIFICATE OF CONFORMITY CONFORMING TO EC Machinery Directive 98/37 EC. Fleming Agri-Products Ltd Newbuildings Industrial Estate Newbuildings Northern Ireland BT47 2SX declare in sole responsibility, that the product Type: 3’ Inline/Offset Topper Type: 4’ Inline/Offset Topper Type: 5’ Inline/Offset Topper...