1.1 FUNDAMENTAL PRECAUTIONS On delivery, your dealer gave you an explanation of the operation and maintenance of this Fleming topper. Please read and understand these operating instructions before operating the machine for the first time. It is essential that you observe all safety instructions.
NEVER attach to a tractor which would be rendered unstable when the implement is operated at its full ca- pacity. Take note of the maximum load permissible on the linkage. The weights of the various models are given in the table below. Model Weight TOP3 130 kg TOP4 202 kg TOP5...
Regularly check that blades are kept sharp and free from damage. Replace if any damage is apparent. When replacing the blades ensure only the correct FLEMING blades are used. Blades should be replaced in pairs to ensure that the rotor remains balanced. ALWAYS replace the blade bolts with new genuine Fleming bolts when the blades are changed.
1.6 INITIAL ASSEMBLY Remove all components from the bag which was attached to the machine on delivery. Slacken the bolts which attach the A frame to the frame of the topper, reposition the A frame into a vertical position and retighten the bolts. Attach the large D-shackle to the eye on the back of the A frame.
Page 7
Rotor maintenance The rotor should be checked after the first 10 hours, the first 50 hours, and the first 100 hours of use. The rotor should then be checked periodically to ensure it has remained tight. 1) Ensure PTO is turned off completely. Remove key from ignition.