OBi300 FRONT OBi300 REAR Note: The USB port was designed by Polycom to accommodate a storage device that enables local and remote access of stored files over the Internet by authorized users. This setup is not utilized for Voice and this USB port...
CONNECT CABLES Please follow the diagram below to install your ATA. Connect 'Internet' directly to your Router or Internet Connection Source Connect 'Phone' to the 'Line In' on your Fax, or use the RJ9 to connect to a phone. Only use the power supply designed for your ATA to avoid damaging the ATA.
Page 6
USING YOUR ATA FAX MACHINE CONFIGURATION If you are having problems with faxing, you may need to refer to your fax machine owner’s manual and adjust the configuration on your fax machine. For best performance with Cloud PBX: • If your fax machine has an “ECM” (Error Correction Mode) feature, please disable this function.
Page 7
UPDATING YOUR ATA Configuration of your ATA occurs within the Control Panel. LOGGING INTO THE CONTROL PANEL • Go to http://www.intermedia.net/login • Click the ‘For admins’ tab • Enter the Account Owner’s user name and password • Press the ‘Login’ button •...
Page 8
UPDATING 911 ADDRESS Within the Control Panel: • Click on the Devices tab • Locate the ATA in question and click on the link • Click on the ‘911 Address’ tab on the left side • Update the address as appropriate •...
Need help?
Do you have a question about the OBi300 and is the answer not in the manual?
Questions and answers