Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for EAGO AM219
Summary of Contents for EAGO AM219
- Page 1 AM219/220/221 Installation Introduction...
-
Page 2: Safety Information
Safety information Hazard symbol: this icon reminds users that product is accompanied by dangerous voltage! Contenets Warning symbol: this icon reminds users that the product is accompanied by important operating and maintenance ！ instructions Safety Instruction 【Warming】 03-08 Component Struction and Water and Wire Instruction Diagram 1. - Page 3 AM219 Component Struction AM219 Water and Wire Instruction Diagram 3629-A-5 Plastic Skirt panel drain Control panel Bathtub feet Am219 Stainless steel bracket Electronic control box Fixed clip Suction (stainless steel) (H-04) ½ nozzle with high round adjustment switch Power install position...
-
Page 6: Installation Step
Installation step Faucet Pipe Connecting Diagram Standard figuration 1501 Hand shower The water outlet pipe lays in the bottom of the bathtub, with diameter 38mm, the pipe could be elbow in whatever way you like. Please put the pipe into water drain system and seal it well. -
Page 7: Water Testing
Control System Connecting Diagram Water testing The product adopts the standard accessories. Please refer to the product tech parameter and follow the installation steps as below: Confirm the product install position connect the drain connect the water inlet pipe check and clean water testing WIRING DIAGRAM OF MASSAGE BATH CONTROLLER 1. -
Page 8: Feature Overview
Control System Connecting Diagram Faucet Instruction 1. Feature Overview Model PB3133-2012 Function Child lock function √ √ Water pump surfing √ Bubble Heating/Thermostat √ √ Temperature probe Hand shower Waterfall Off √ Bottom light √ FM Radio Bluetooth Water level probe √... -
Page 9: Control Panel Instruction
Control Panel Instruction Control Panel Instruction 7.2 Touch “ 、 ” continuously when the system is on. When the cursor is on the “ ”position, touch “ ” to turn on the radio, screen shown the current frequency and “FM”. Touch “ ”... - Page 10 Control Panel Instruction Notice 8. 4 Temperature set 1. User should follow wire diagram and specification instructions strictly to fix the product. 8.4.1 When system and thermostat heating function are started, Touch “ ” continuously till it displays 2. Ground wire of controller should be connected to power supply wire in well ground wire condition. temperature unit ℃, and when it displays temperature value, press to increase or decrease1 ℃;...
-
Page 11: Troubleshooting
5. The water pipe and air pipe may be 5. Other probable cause. B. Installation damage by neither the EAGO agent nor appointed installation mixed up. Please contact the professional Some models of bathtub can not drain all water out from the Some water left technician to fix it.