SOLAR PILING LITE – 8"
MODEL: LL-SPL-8-X-X
Battery Cover
Battery
& Silicone Pad
1
Use a screwdriver to remove the base. Next,
remove the reflector and lens. Remove the 6‐
screws on battery cover and silicone pad.
3
Replace the silicone pad and battery cover in position. Use a
screwdriver and 6 screws to tighten the cover ensuring that
each screw is equally tight ensuring a waterproof seal.
Phillips Screwdriver
Fixture
Fixture & Base
Ultra Bright Tech
P.O. Box 414
105 W. Simon St.
Laotto, IN 46763
2
Connect the Battery: Caution! Align notches before
joining both connectors. Forcing or connecting
backwards may damage the light or the connector.
4
Use a screwdriver to reattach the bottom to the fixture.
Phone: 260‐918‐2758
Fax: 260‐918‐3540
E‐mail sales@ultrabrighttech.com
Web: www.solarfencelights.com , www.ultrabrighttechnologies.com