4. Mechanical Instructions
Index of this chapter:
4.1 Assy/Panel Removal
4.2 Set Re-assembly
4.1 Assy/Panel Removal
Notes: Please put your machine on soft material to avoid to scrape
panel when you disassemble it.
Front view
Back view
Step 1. Remove the stand.
Remove the four screws as Fig.2.
Step 2. Remove the Back cover assy.
Remove the 10 screws on the bottom side as Fig.3.
Step 3. Remove the Vase plate and Bracket-base.
Remove the 14 screws on the bottom side as Fig.4.
4. Mechanical Instructions
Step 4. Remove shielding.
Fig.1
Fig.2
Step 5. Remove Scaler board, Power board, SideAV board and
Fig.3
Remove 10 screws as Fig.5 and remove 10 screws as Fig6.
IR board.
Remove 17 screws as Fig.7.
TPS1.1L LA
9
Fig.4
Fig.5
Fig.6
Fig.7