ubiolabs PBB196 Quick Start Manual

PBB196 Quick Start Guide
Power
10,000mAh Universal
Portable Wireless Charger
User Manual and
Safety Instructions
Before First Use:
Connect your power bank using a USB-C or Lightning®
cable into a wall charger or your phone. The battery
indication LEDs will light up and you are ready to go.
Sleep Mode / Shake to Wake
Power bank goes into sleep mode after 5 seconds
when not in use. Shake to wake the power bank to
read battery indicator.
Portable Charger Features
1
2
3
Features
1 - Qi Wireless Surface
2 - Wireless Charge Indicator
3 - Lightning Input
4 - USB-C Input/Output
5 - USB-A Output
6 - LED Charge Indicators
7 - LED Battery Display
Technical Specifications
Component: PWB1085
Cell Type: Lithium Ion Polymer, 10,000mAh
Input 1: Lightning 5V, 1.8A
Input 2: USB-C 5V, 2.4A
Output 1: USB-C 15W 5V, 3.0A
Output 2: USB-A 12W 5V, 2.4A
Output 3: 5W Qi Wireless
Battery Indicator: 7-Segment, 3 digit LED
Dimensions: 137 x 65.5 x 18.4 mm (5.4 x 2.6 x .7 in)
Weight: 250g (8.82 oz)
Your wireless power bank is designed to provide
optimal power delivery for your wireless device: Up
to 5W wireless charging for Wireless Charging Case
for AirPods® and other compatible devices
Wireless Charging Case for AirPods and Lightning are
trademarks of Apple Inc., registered in the U.S. and other
countries.
Warranty
At Ubio Labs, we are dedicated to designing and
manufacturing products with superior performance
and 100% customer satisfaction. All of our products
come with a 1 year limited warranty from date of
purchase.
We are always improving our products' features and
functionality. We reserve the right to change product
specifications at any time without notice.
7
6
4
5
Important Safety Instructions
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Caution: The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
di erent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
WARNING – When using this product, basic precautions
should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is
necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended or
sold by power bank manufacturer may result in a risk of fire
or injury to persons.
f) Do not use a power bank in excess of its output rating.
Overloaded outputs above rating may result in a risk of fire
or injury to persons.
g) Do not use a power bank that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
h) Do not disassemble the power bank. Take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or injury to persons.
i) Do not expose the power bank to fire or excessive
temperature. Exposure to fire or temperature above
100°C/212°F may cause explosion.
j) Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the product is maintained.
k) Switch o the power bank when not in use.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush,
Heat Above 45˚C or Incinerate. Follow Manufacturer's
Instructions.
This device complies with Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device
must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes: (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même sile brouillage est susceptible
d'en compromettre le fonctionnement
The device has been evaluated to meet general RF
exposure requirement. Tomaintain compliancewith RSS102
— Radio Frequency (RF) Exposure
guidelines, this equipment should be installed and
operated with a minimum distance of 20cm between the
radiator and your body.
Cet équipement est conforme aux limites d'exposition de
rayonnement d'IC RSS-102 déterminées pour un
environnement non contrôlé. Cet équipement devrait être
installé et actionné avec la distance minimum 20 cm entre
le radiateur et votre corps.
DO NOT RETURN TO
THE STORE
Our customer support team is here to help.
Model: PBB196 / PWB1085
www.ubiolabs.com
support@ubiolabs.com
1-866-642-4428
(Monday - Friday 9am - 4:30pm PST)
2821 Northup Way, Suite 250
Bellevue, WA 98004
SAVE THESE INSTRUCTIONS