Advertisement
1 Unboxing
Welcome to Raumfeld
Take a moment to check that all components shown
below were included with your delivery.
Before you start using this product, please read the
safety instructions carefully.
2 x
Please keep the box for the duration
of the warrantee period.
2 Assembly
1
Begin by attaching the base
to the column using the four
identical screws included with
delivery for this purpose.
Note: The cable routing from
the top of the base and upper
end of the column must be
facing the back side of the
stand.
3
Lay the power and speaker
cables through the stand's
column and out through the
cable opening on the upper
side.
2
You may now attach the
adapter plate for connecting
the stand to the bottom of
the Raumfeld loudspeaker.
Use the screws included with
delivery for this purpose.
Note: The flat side of the
round adapter plate must
face the back side of the
loudspeaker.
4
Now place the loudspeaker
with the adapter plate
attached onto the stand's
column. Use the three screws
included with delivery to
firmly connect the stand to
the loudspeaker.
Advertisement
