Rack Mounting The Freespace 4400 System - Bose FREESPACE 4400 Owner's Manual

4.5 Rack mounting the FreeSpace
4400 system
The FreeSpace 4400 system requires three 1.75" (44 mm) rack
space units with a 16" (406 mm) inside depth (including the rear
supports). When mounting, use four screws with washers to pre-
vent marring the front panel. Neoprene rubber washers are a
good choice because they grip the screw head and prevent the
screws from backing out from vibration or during transportation.
Installer's Note: If the FreeSpace 4400 system is to be
transported while mounted in a rack, be advised that the rear
of the FreeSpace 4400 system must be mechanically sup-
ported. Install a shelf under the unit or use brackets in such a
way as to support the rear of the unit. Failure to use proper
mounting hardware may result in damage to the FreeSpace
4400 system during transport.
4.0 Hardware Installation
15 of 66
Attaching rack ears to the FreeSpace 4400 chassis
Attaching the FreeSpace 4400 chassis to the
rack (mounting screws not provided)