Advertisement
2) Install ooh!Media
A.
Insert the ooh!Media CD into the CD-ROM drive.
If the installation does not start automatically, do the following:
•
Select Start > Run.
•
Type D:/amplayer (use the correct letter for your CD drive if not
D) and click OK.
3) Send a test message
A.
Start ooh!Media.
Click Start > All Programs > ooh!Media > ooh!Media.
B.
In the lower portion of the ooh!Media window under Run-time
Objects, click the insert new text button.
A new text message box appears in ooh!Media.
March 16, 2007
B.
On the first screen, click the Install ooh!Media button and follow
the instructions.
C.
Highlight the text inside the message and type an appropriate test
message.
D.
Extend the length of the message by stretching it in the Timeline
(see below).
Extend the message long enough for you to go to the sign and
look at it.
© 2007 Adaptive Micro Systems LLC. All rights reserved
C.
In the Network Setup window, select Use the Following IP
Address and enter the values you received from the network
administrator.
D.
Click Set.
E.
If the Login prompt appears, enter your password, click OK and
then click Close in the Network Setup window.
E.
Click the disk icon to save the message.
F.
Name the message and click Save.
Time in seconds
G.
Click the send message icon to send the message to the sign.
H.
Verify the message appears on the sign.
Fill in the following:
•
IP Address
•
Subnet Mask
•
Default Gateway
Select Native.
PN 1199611201B
Advertisement
