HIKVISION DS-1H34 Series User Manual page 8

Serial
Item
No.
PD
1
Indicator
RJ45
2
Interface
DIP
3
Switch
4 GND
2.2 Output Panel
Refer to Figure 2-2 for the input panel (PoE IN) of
DS-1H34-0101P and DS-1H34-0102P.
Figure 2-2 Output Panel of DS-1H34-0101P
Refer to Table 2-2 for the description of output panel
(PoE OUT) of DS-1H34-0101P.
Table 2-2 Description of Output Panel for DS-1H34-0101P
Serial
Item
No.
1
Indicators
RJ45
2
Interface
Refer to Figure 2-3 for the output panel (PoE OUT) of
DS-1H34-0102P.
Table 2-1 Description
Description
Lights in green when PSE is
connected.
Input network interface:
10/100BaseT(X) and IEEE 802.3at
standard of PD (Power Device)
connection.
The indicator lights in yellow
when there is no data
transmission and flashes in yellow
when there is data transmission
when PSE is connected.
ON: 10 Mbps mode of PSE
network interface is enabled and
the network transmission distance
can reach 200 meters.
OFF (default): Normal 100 Mbps
mode of PSE network interface is
enabled and the network
transmission distance is 100
meters.
Ground terminal.
Description
REPEAT Indicator: Lights in red
when the output power exceeds
the limit.
PSE Indicator: Lights in green
when PD is connected and the
power supply is normal.
Output network interface:
10/100BaseT(X) and IEEE
802.3af/at standard of PSE output.
of Input Panel