Page 2
6189N Customer Approval : Company Title Signature Date Fn-Link...
Page 3
6189N-SFC Revision History Version Date Revision Content Draft Approved 2019/01/10 New version 2019/04/10 Update thickness dimension 2019/08/06 Update packing information 2019/11/12 Update module photo...
6189N 1 Overview 1.1 Introduction 6189N-SFC is a highly integrated and excellent performance Wireless LAN (WLAN) SDIO network interface device. High-speed wireless connection up to 150 Mbps. It can be easily manufactured on SMT process. This WLAN Module design is based on Realtek RTL8189FTV-VC-CG. It is a highly integrated single-chip Wireless LAN (WLAN) SDIO network interface controller complying with the 802.11n specification.
6189N-SFC PHY Data rates Wi-Fi: 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: up to 150Mbps Transmit Output Wi-Fi: Power 802.11b@11Mbps 15±2dBm 802.11g@54Mbps 14±2dBm 802.11n@65Mbps 14±2dBm Other rate power control by power by rate.
6189N-SFC 6 Host Interface Timing Diagram 6.1 SDIO Pin Description The module supports SDIO version 2.0 for all 1.8V 4-bit UHSI speeds: SDR12(25 Mbps), and SDR25(50Mbps) in addition to the 3.3V default speed(25MHz) and high speed (50 MHz). It has the ability to stop the SDIO clock and map the interrupt signal into a GPIO pin.
6189N-SFC 7 Reference Design Note: 1. chip_EN could not use for module power off, please switch the 3.3V power for module on/off. 2.please keep the antenna on no metal area.
6189N-SFC 8 Ordering Information Part No. Description RTL8189FTV-VC-CG b/g/n, Wi-Fi, 1T1R, 23X21mm, SDIO, FG6189NSFC-00 PCB V1.0 with antenna 9 The Key Material List Shielding 6189N-SFC V1.0 Shielding cover insulation layer Main cover 14.79x10.72-full height of 1.4 copper, no positioning pin 26mhz 3225 ±10ppm, 10.5pF, E3SB26E00002SE10C0BB...
6189N-SFC 10.2 Patch Wi-Fi modules installed before the notice Wi-Fi module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil. 2. Take and use the WIFI module, please insure the electrostatic protective measures.
6189N-SFC 11 Package 11.1 Reel A roll of 350pcs 11.2 Packaging Detail the take-up package Using self-adhesive tape Size of black tape:44mm*12.48m the cover tape :37.5mm*12.48m Color of plastic disc:blue A roll of 350pcs...
Page 18
6189N-SFC NY bag size:420mm*450mm size :335*335*55mm The packing case size:335*255*360mm...
Page 19
RF Exposure Information and Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 20
Instructions to the OEM/Integrator: This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC/ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, Additional FCC/IC approvals must be obtained.