Download Print this page

Wiring - Wahl James Martin MultiFive Mini Manual

Advertisement

James Martin MultiFive Mini Blender

WIRING

WARNING: IF THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED BY
THE MANUFACTURERS SERVICE AGENT OR A SIMILARLY QUALIFIED
PERSON IN ORDER TO AVOID A HAZARD.
The wires in the mains lead of this mini blender are coloured in accordance to
the following code:
Blue Neutral (N)
This appliance is fitted with a 3 pin plug which has a 3 amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes damaged, it
should be cut off and disposed of, and a suitable plug fitted as detailed below.
As the colours of the wires in the mains lead of this Mini blender may not
correspond with the colour markings identifying the terminals in your plug,
proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the plug
which is marked with the letter 'N' or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal in the
plug which is marked with the letter 'L' or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked with
the letter 'E' or has the Earth symbol, or coloured GREEN or GREEN/YELLOW
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DIRECTIVE 2002/96/EC
(WEEE)
8
Brown live (L)
At the end of this products life it should not be disposed of
with general household waste.
Care should be taken to dispose of in a suitable manner in
accordance with your Local Authority regulation.

Advertisement

loading

This manual is also suitable for:

Zx884