Advertisement
TN840 Extender Cards and Kits
To facilitate testing, alignment and maintenance for the MT-3 and MT-4 radio systems, extender cards and kits can
be used to extend the individual modules out from the subrack.
Extender cards plug directly into the subrack, and are shown in Figure 1.
Figure 1: EC-96D1 and EC-48RD Extender Cards
Extender kits (extender card and a four foot cable) allow the modules to be extended out to a bench for servicing
as shown in Figure 2.
Figure 2: Extender Kit
TECHNICAL NOTE:
TN840, REV 4-1-0, © Mar 2013
CANADA/US
+1 250 382 8268
CONNECT TO
MODULE
EXTENDER
CARD
CABLE
| TOLL FREE
+1 800 664 4066
TECHNICAL NOTES
MT-3/4 Radio Systems
EXTENDER
CARD
TO SUBRACK
LMRSALES@CODANCOMMS.COM
CODANCOMMS.COM
Page 1 of 2
Advertisement
Table of Contents
Summary of Contents for Codan EC-96D1
- Page 1 Extender cards plug directly into the subrack, and are shown in Figure 1. Figure 1: EC-96D1 and EC-48RD Extender Cards Extender kits (extender card and a four foot cable) allow the modules to be extended out to a bench for servicing as shown in Figure 2.
- Page 2 Recommended Test Points are: Audio Control Card and Base Control Card Extender Card pins (EC-96D1 and EC-96K-1.22): Auxiliary 1 Audio Output = B11 & A11 Auxiliary 2 Audio Output = C1 &...
Need help?
Do you have a question about the EC-96D1 and is the answer not in the manual?
Questions and answers