Advertisement
After flight checks and maintenance
Even if you did not land the quadcopter in water, salty air and spray can cause corrosive
actions. After flight remove the propellers and submerge each motor momentarily in fresh
warm water. Thoroughly rinse the quadcopter off with fresh water and dry. Where possible,
clean the drone directly after use or within 2 hours. Spray the motors and electrical connections
with CorrosionX. Use OANNES Silicon Grease to nourish the GPS Lid membrane.
Remove the Quadcopter battery and place it in fire- proof pouch or container and store in a cool
environment.
Carefully inspect all propellers, if a propeller is damaged (Even slightly damaged) - replace the
propeller immediately. Do not attempt to fly the aircraft with a damaged propeller as this can
cause the aircrafts stability to deteriorate or become unmanageable, resulting in the potential
loss of the drone and/or causing personal injury.
VISIT OUR WEBSITE FOR MORE TIPS HOW TO'S AND Q&A
ULTIMATEDRONEFISHING.COM
PRE-FLIGHT CHECKLIST
COPYRIGHT © 2020 UDF ENTERPRISES, PTY LTD
Advertisement
