Page 2
Seal One USB. ® For your own safety, please verify the transaction shown on the Seal One® USB display before you sign it by pressing the button. Seal One USB is ready with out of the box feature (without any ®...
Page 3
2.3 Seal One ID readout ® The Seal One ID is needed in order to registrate/activate Seal One ® by an acceptance partner. It has to be entered in the acceptance parter appication. To readout the Seal One ID, please proceed as follows: ®...
In this case, please use the device without USB extension cable or use another USB port of your Laptop/PC. If you are using the Seal One USB with ® a company Laptop/PC, please contact your system administrator.
Page 5
First, pull the Seal One ® out of the USB port and then reconnect Seal One® USB to your laptop/PC. As an alternative you can shut down the compu- ter and restart it. Note: If this message icon iis shown cons-...
Page 6
USB is ready to use when the following screen appears. Note: The points are moving towards the arrowhead. If the Seal One Logo or any other symbol remains on Seal One ® display (e.g., Warning or error may appear): see Chapter 3 - Symbols and their meaning...
Page 7
Situation 1: Autorun on your laptop/PC is enabled Default setting: The application starts automatically when Seal One ® is connected to a USB port of your laptop/PC. Start the application by clicking on „Seal One“. For further instructions see Chapter 3, Step 2.
Page 8
Open „This PC“ or „Computer“ or select „Explorer“ in the Start Menu. Seal One ® USB is mounted in your system as a CD-ROM drive. Start the application by double clicking on „Seal One“. For further inst- ructions see Chapter 4, Step 1. 4.3 Using Seal One USB with macOS ®...
Page 9
CD-ROM drive not mount automatically, this step has to be and start the application „SealOne“. To use the entire functionality of the Seal One application, you need a Linux distribution which contains the GTK graphics library. The application can also be used without a graphical interface. In this line.
„Settings“. 5.1 Common In the tab „Common“ you can enable or disable the „Quickstart“ option. If „Quickstart“ is enabled, your Seal One USB is immediately in ® operational mode after you start your laptop/PC (and you connect your Seal ®...
5.3 Firewall settings settings might have to be adjusted. Maybe the incoming and outgoing Seal One connections. Note: The warning symbol is blinking. 5.4 Rotate Display When the Seal One USB is connected to ® the laptop/PC, the symbol appears in the...
Do not disconnect the Seal One USB device until the update process is ® completed. The update progress is shown on the Seal One USB screen. ® After updating successfully, the following window will be shown. Click „OK“...
Never throw the 7.1 Legal disclaimer Seal One AG disclaims all liability for damages resulting due to improper use. Opening the Seal One USB and any changes on the device are ®...
7.4 Device maintenance The Seal One USB is designed and manufactured with great care and ® therefore should be treated with care. The following recommendations and handling instructions should help you ensure continuous operation and a long life expectancy: want to perform transactions with the device.
Please note that the USB extension cable is designed for exclusive use with Seal One USB. The manufacturer assumes no liability for any use ® not in connection with Seal One USB. ® You can also use a standard USB extension cable with the Seal One ®...
Page 16
Berliner Straße 44 60311 Frankfurt am Main www.seal-one.com macOS is a registered trademark of Apple Inc. Microsoft is a registered trademark of Microsoft Inc. ® Seal One is a registered trademark of Seal One AG. Seal One – Patented Technology...
Need help?
Do you have a question about the 3200K and is the answer not in the manual?
Questions and answers