Summary of Contents for XU1 XLRHS-018
- Page 1 XU1 Power tools 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 XLRHS-018 0119...
- Page 2 1 Forward/Reverse Selector 4 Soft Grip Front Handle 7 Accessory Locking Sleeve 2 Variable Speed Trigger 5 LED Worklight 8 SDS+ Chuck 3 Soft Grip Rear Handle 6 Mode Selector...
-
Page 3: Specifications
SPECIFICATIONS CONTROLS OPERATION Voltage: Forward/Reverse Selector Usage Tips No Load Speed: 0-900/min 1. For forward rotation, push the Forward/Reverse 1. Depress and release the Variable Speed Trigger to Impact Power: 1.2J Selector towards the left side of the tool. ensure it is not locked. 0-5,000bpm Impact Rate: 2. -
Page 4: Maintenance
MAINTENANCE WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A WARNING! Ensure the tool is turned off CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS and disconnected from the power supply WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. -
Page 5: Safety Instructions
SAFETY GENERAL POWER TOOL or a key left attached to a rotating part of the power tool may result in personal injury. SAFETY WARNINGS INSTRUCTIONS e) Do not overreach. Keep proper footing and balance at all times. This enables better WARNING! Read all safety DESCRIPTION OF SYMBOLS control of the power tool in unexpected situations. - Page 6 ADDITIONAL SAFETY WARNINGS FOR ROTARY HAMMERS WARNING! This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Need help?
Do you have a question about the XLRHS-018 and is the answer not in the manual?
Questions and answers