ALPHACOOL INTERNATIONAL GMBH über den Gewährleistungsanspruch. 4. Es liegt allein im Ermessen von ALPHACOOL INTERNATIONAL GMBH, das defekte Produkt oder defekte Bestandteile zu reparieren oder zu ersetzen. Das jeweils ersetzte Produkt oder der Bestandteil geht in das Eigentum von ALPHACOOL INTERNATIONAL GMBH über.
[Maße in mm] Die untere Hälfte des Ausgleichsbehälters kann abgeschraubt und um 180° gedreht werden. Querschnitt A-A: Anschlüsse: • 4x G1/4‘‘ IN • 1x G1/4‘‘ OUT Maximales Wasservolumen: ca. 28,7 ml Pumpenkompatibilität: Die Eisstation 40 DC-LT-Reservoir ist mit allen DC-LT Pumpen kompatibel!
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH MONTAGE PUMPENMONTAGE Verschrauben Sie Ihre Pumpe mit einem O-Ring unten am Ausgleichsbehälter: M3x8 Schrauben DC-LT Pumpe O-Ring PUMPE ANSCHLIEßEN Die DC-LT Pumpe wird über einen 3-Pin Anschluss mit Strom versorgt. Stecken Sie den Anschluss auf Ihr Mainboard auf: Einige Mainboards verfügen über spezielle Steckplätze für Pumpen.
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH MONTAGE AM RADIATOR Verschrauben Sie zuerst den Adapter (2x G1/4‘‘ Außengewinde, drehbar) am Radiator: Adapter (2x G1/4‘‘ Außengewinde, drehbar) Verschrauben Sie nun den Ausgleichsbehälter am Adapter (2x G1/4‘‘ Außengewinde, drehbar):...
Page 9
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH MONTAGEMÖGLICHKEITEN:...
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH VERSCHLAUCHEN UND INBETRIEBNAHME • Verschließen Sie die Einlässe am Ausgleichsbehälter mithilfe der 3 Verschlussschrauben: Nutzen Sie das Verschlussschrauben- Tool. • Schließen Sie nun die Schläuche an den Gewindeeingang des Radiators (entspricht IN) und den des Ausgleichsbehälters (entspricht OUT) an: •...
Page 11
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH • Sie können den Ausgleichsbehälter auch einzeln, ohne Radiator benutzen. Schließen Sie die Schläuche am Ausgleichsbehälter an und schließen Sie die nicht benötigten Einlässe mithilfe der 3 Verschlussschrauben: Nutzen Sie das Verschlussschrauben- Tool. • Befüllen Sie nun den Ausgleichsbehälter mithilfe eines Trichters durch den oberen Fillport: Wir empfehlen ausschließlich klare...
(§ 14 BGB). 3. The warranty claim is valid only in combination with the original invoice, the sales slip or an ALPHACOOL confirmation on warranty claim. 4. It is ALPHACOOL INTERNATIONAL GMBHs own discretionary authority to replace or repair the defective product or defective component. The replaced product or component changes into property of ALPHACOOL INTERNATIONAL GMBH.
The lower half of the reservoir can be unscrewed and turned by 180°. Section A-A: Thread inputs: • 4x G1/4‘‘ IN • 1x G1/4‘‘ OUT Max. capacity: approx. 28.7 ml Pump compatibility: The Eisstation 40 DC-LT-Reservoir is compatible with all DC-LT pumps!
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH INSTALLATION INSTALLATION OF THE PUMP Screw your pump with an o-ring to the bottom of the reservoir: M3x8 screws DC-LT pump o-ring CONNECTING PUMP The DC-LT pump is supplied with power via a 3-pin connector. Plug the connector onto your mainboard: Some mainboards have special 4-pin sockets for pumps.
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH MOUNTING TO THE RADIATOR First screw the adapter (2x G1/4'' outer threads, rotatable) to the radiator: adapter (2x G1/4‘‘ outer threads, rotatable) Now screw the reservoir to the adapter (2x G1/4'' outer threads, rotatable):...
Page 17
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH MOUNTING OPTIONS:...
• Now connect the tubes to the inlet of the radiator (equivalent to IN) and the inlet of the reservoir (equivalent to OUT): • Then fill the Eisstation 40 DC-LT-Reservoir with a funnel through the upper fillport: We only recommend clear coolants...
Page 19
3 screw plugs: Use the plug key • Now fill the Eisstation 40 DC-LT-Reservoir with a funnel through the upper fillport: We only recommend clear coolants from our own production (CKC or Eiswasser Crystal - no UV!) or pure distilled or osmosis filtered water.
(§13 du Code civil). Si vous êtes entrepreneur, la période de prescription sera fixée à seulement un an (§14 du Code civil). 3. La garantie est valable qu’avec la facture originale, le ticket de caisse ou une confirmation de garantie de la part d’ALPHACOOL INTERNATIONAL GMBH.
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH FICHE TECHNIQUE [Dimensions en mm] La moitié inférieure du réservoir peut être dévissée et tournée de 180°. Coupe transversale A-A : Ouvertures : • 4x G1/4‘‘ IN/ entrée • 1x G1/4‘‘ OUT/ sortie Capacité maximale : approx. 28,7 ml Compatibilité...
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH MONTAGE MONTAGE DE LA POMPE Vissez la pompe et le joint torique au fond du réservoir : vis M3x8 pompe DC-LT joint torique CONNEXION DE LA POMPE La pompe DC-LT est alimentée en courant via un connecteur à 3 broches. Branchez le connecteur sur votre carte mère :...
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH CONNEXION DES TUYAUX ET MISE EN SERVICE • Fermez les entrées du réservoir à l'aide des 3 bouchons : Utilisez l’outil de bouchon. • Raccordez maintenant les tuyaux à l’entrée filetée du radiateur (correspond à IN/ entrée) et celle du réservoir (correspond à...
Page 27
Eisstation 40 DC-LT-Reservoir Alphacool International GmbH • Vous pouvez également utiliser le réservoir individuellement sans radiateur. Raccordez les tuyaux au réservoir et fermez les entrées non utilisées à l'aide des 3 bouchons : Utilisez l’outil de bouchon. • Maintenant, remplissez le réservoir avec un entonnoir par l’ouverture sur le côté : Nous conseillons uniquement l’utilisation de liquides clairs de notre...
Need help?
Do you have a question about the Eisstation 40 DC-LT-Reservoir and is the answer not in the manual?
Questions and answers