Page 1
SETP. Press ENTER until the Baud Rate parameter is selected. Key in a number from the above table and then press the ENTER key. Press MANUAL to exit the parameters. Other Settings All Fadal controls have the settings detailed below. These are fixed and cannot be changed with the machine parameters. Hand Shaking...
Page 2
How to send and receive <ENTER> = press the ENTER key Sending to machine ShopLink FLASH is powered up with the “FILE” led on, ready to send (select “SEND” folder). At the machine, press the manual key until the ENTER NEXT COMMAND prompt is showing. Enter TA,1 <ENTER>...