Polygroup TV46P7001X00 Assembly Instructions

Download this manual

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from

Carefully follow the instructions below on how to assemble your new tree quickly and at ease:

1. Choose your desired spot for assembling the tree.

2. Assemble the tree stand (Fig. A) and place on a level surface.

Fig. A - Tree Stand Assembly

Fig. B - Tree Assembly

Tree Bottom

3. Insert the pole of the tree top into Tree Bottom until firmly secured.

4. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out

in a star shape (Fig. C), and continue until the entire tree is shaped.

Fig. C

Top view

5. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps. Your Christmas

tree is now ready to be decorated.

MODEL #: TV46P7001X00

Polygroup®!

Tree Top

Side view

2019 TREE LETTER "GG"

Sku # 5064423

Slide the legs up into the

slots of the base on the

trunk on the Bottom

Section until firmly secured.

* For Indoor Use Only

Page 1 (Fig. C), and continue until the entire tree is shaped. Fig. C Side view Top view 5. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps. Your Christmas tree is now ready to be decorated. MODEL #: TV46P7001X00 2019 TREE LETTER "GG"...
Page 2 STORAGE INSTRUCTIONS 1. Remove all ornaments and decorations. 2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the section below, and fold all branches toward the pole. 3. NOTE: In case of difficulty separating the poles, apply a small amount of lubricant at the joint, rotate the upper pole in both directions, and lift the upper pole again.

5064423