Polygroup TG90M2S85C06 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
Fast Shape TM technology which takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
Fig. A - Tree Stand Assembly
Fig. B – Tree and Light Assembly
Section 2
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled
stand. Insert the pole of Section 2 into Section 1. Insert the pole of the Section 3 into Section 2.
Insert the pole of the tree top into Section 3. Ensure that all poles are firmly secure. Be sure that all
wires are free of branch hinges.
5. Connect plugs to extension cords of the same color, and then insert green label plug into the wall
outlet (Fig. B). Your entire tree should now be lit.
6. This tree is constructed with Fast Shape
slightly upsweep all tips and shift branches to fill in any gaps for a fuller, uniform look. Your
Christmas tree is now ready to be decorated.
MODEL #: TG90M2S85C06
Polygroup®!
Click
Tree Top
Section 3
TM technology. Shaping is not necessary; you just need to
2019 TREE LETTER "Y"
Sku # 5168026
This tree comes with
Pull apart tree stand legs until they
snap and form an 'X' shape.
To close the stand, press the metal
button and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
2.72A 120V 60Hz
Insert Red Label
Plugs Into Red Label
Extension Cord
Insert Yellow Label
Plugs Into Yellow Label
Extension Cord
Insert Green
Label Plug Into
Wall Outlet