Download Print this page

Grasshopper 533392 Operation - Parts List - Assembly

Sunshade for front-mount and mid-mount mowers with 2 post rops

SUNSHADE #533392 For: Grasshopper Front-Mount and

Mid-Mount Mowers with 2 post ROPS

OPERATION - PARTS LIST - ASSEMBLY

IMPORTANT

READ THIS MANUAL CAREFULLY AND KEEP FOR FUTURE REFERENCE

CAUTION

REMOVE THE VINYL COVER OR THE COMPLETE SUNSHADE FOR TRANSPORT IN AN OPEN

TRUCK OR TRAILER

! WARNING!

THIS SUNSHADE WILL NOT PROTECT OPERATOR FROM INJURIES CAUSED BY COLLISION,

OR OTHER ACCIDENTS

30270704

Table of Contents

Need help?

Do you have a question about the 533392 and is the answer not in the manual?

Page 1 SUNSHADE #533392 For: Grasshopper Front-Mount and Mid-Mount Mowers with 2 post ROPS OPERATION - PARTS LIST - ASSEMBLY IMPORTANT READ THIS MANUAL CAREFULLY AND KEEP FOR FUTURE REFERENCE CAUTION REMOVE THE VINYL COVER OR THE COMPLETE SUNSHADE FOR TRANSPORT IN AN OPEN...
Page 2 Carton Contents: SUNSHADE MODEL # 533392 for GRASSHOPPER Part # Qty. Description 30271 Receiver 30272 Bracket 30070 Front Bow (tapered end) 30071 Front Bow 9290 Top Bow 9291 Rear Bow 9295-W Vinyl Cover 30335 Clamp Shim 30273 Hardware Package (contents listed below) 1/4"-20 x 5/8"...
Page 3 Step 2: See Figure 2: Install Bracket A. Attach the Bracket to the assembled frame as shown. Use two 1/4” x 3/4” bolts with 1/4” flat washers inserted outward at Reference B. Use two 1/4” x 5/8” bolts and 1/4” flat washers inserted outward at Reference C.
Page 4 Step 3; See Figure 3: Install and adjust Frame A. Insert the Bracket into the Receivers and tighten the receiver bolts. Hold the frame level and tighten the Bracket to frame bolts. Insert the hand knobs into the weld nut on the receivers and tighten.