Advertisement
Quick Links
Center of Gravity Instructions
1. Replace shocks with solid struts.
2. Fill vehicle with all fluids.
3. To activate the CG mode press the up or down arrow and select Center Of
Gravity.
4. To adjust wheel base go into the CG menu and change the value to the
nearest inch using the up or down arrows.
5. Place vehicle on scales.
6. Select "store weight", this will store total vehicle and front weights. If the CG
displays OVER, then the CG calculation has gone over 100 inches. You will
then need to try again.
7. Raise the rear of the vehicle 10 inches.
8. CG number will appear on the screen.
9. To turn off the CG mode go back to the CG menu and turnoff the CG function.
For Further Technical Assistance Please Contact
Tanner Racing Products by MB
10 Cooperative Way
P.O. Box 110
1-800-467-2464
www.tannerracing.com
www.mittlerbros.com
Wright City, MO 63390
Foristell, MO 63348
Fax 1-636-745-2874
By
Racing Products
Deluxe RaceScale
Instructions
15" Pads
Advertisement
Related Manuals for MB Tanner Racing Products Deluxe RaceScale
Summary of Contents for MB Tanner Racing Products Deluxe RaceScale
- Page 1 9. To turn off the CG mode go back to the CG menu and turnoff the CG function. Deluxe RaceScale For Further Technical Assistance Please Contact Tanner Racing Products by MB 10 Cooperative Way Wright City, MO 63390 P.O. Box 110...
- Page 2 Scaling Instructions 1. Set all scale pads out individually. 2. Plug the cables into the scale pads. 3. Turn the scales on by pushing the On/Off Button. The scales will turn on and read Tanner Racescales and show you the level of the battery. If the battery is low you may want to charge the unit.
Need help?
Do you have a question about the Tanner Racing Products Deluxe RaceScale and is the answer not in the manual?
Questions and answers