Sony Bravia KLV-20G300A Operating Instructions Manual page 19

Dual Sound
Speaker
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
A2 (German) stereo
A2 (German) bilingual
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The sound
becomes monaural, but the noise is reduced.
• The "Mono" setting is memorized for each programme position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the programme
position.
• You cannot receive stereo or dual sound when "Low" or "High" is selected in "Audio Filter"
(page 24).
Tips
• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand,
etc.
• If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main" or
"Sub".
Switches on/off the TV's internal speakers.
"On": The TV speakers are turned on in order to listen to the TV's sound through
TV's speakers.
"Off": The TV speakers are turned off in order to listen to the TV's sound only
through your external audio equipment connected to the audio output jacks.
Selection
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
Mono (regular sound)
Main (main sound)
Mono (regular sound)
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
19
GB