Buffalo CN219 Instruction Manual page 10

UK
 Clean the channel connecting the bowl and
the tap, using a cleaning brush (included)
(fig 20).
 Refit the tap.
 Pour a little water inside the pan.
 Use the tap to drain out all water from the
pan so as to eliminate any small product
residues inside the dispensing channel.
Disassembling and cleaning the tap
To clean the inside of the tap, disassemble it as
follows:
Remove the tap (See removing the tap).

 Place the tap on a clean, flat surface.
 Loosen and remove the screw (A).
 Slide out the pin (B) and spring(C) from the
seating.