Summary of Contents for Voyager AIR WHEEL
- Page 1 A I R W H E E L B A L A N C E E - S C O O T E R HOVER-2010AW ITEM NUMBER I U S E R ’ s M A N U A L...
-
Page 2: Before You Ride
4. Find a safe environment to use the Air Wheel e-scooter. When you are starting out, we recommend a flat or mostly flat surface to get acquainted with the device and its controls. -
Page 3: Specifications
I n t r o d u c t i o n Thank you for purchasing your new Air Wheel Balance E-Scooter and welcome to the Voyager family. We hope that you’ll do plenty of exploring on your new balance e-scooter. The Air Wheel is compact, portable and packs plenty of power to get you where you’re going. - Page 4 T H E D E V I C E ON/OFF Switch Bumper Platform Motor LED Lights Wheel LED Lights...
- Page 5 2. Plug the included charger into a grounded wall outlet. 3. Connect the power supply to the Air Wheel via the charging port. 4. An LED indicator light on your Air Wheel will turn red to indicate that the battery is charging.
- Page 6 A T T E R Y i N D I C A T O R When using your Air Wheel Balance E-Scooter, the battery indicator light will let you know how much power remains in your battery. • When the LED light is green, the battery has enough power to continue riding.
- Page 7 C A L I B R A T I O N The Air Wheel Balance E-Scooter should be calibrated out of the box, but if you find that it is not properly responding to your inputs, you can re-calibrate. • First, start by placing the e-scooter on a flat, even surface.
-
Page 8: G E T T I N G O N
• First, power on the Air Wheel Balance E-Scooter by pressing the power button located on the rear of the device. • Start by standing behind the Air Wheel with your feet lined up behind the two foot pads. • Place one foot on the e-scooter, but keep your weight on your other foot until you are ready to get on. - Page 9 • If you need to go over bumps or rough surfaces, be sure to bend your knees slightly to absorb some of the impact. • To get off of the Air Wheel, take one foot off first and put it behind the e-scooter. Then follow with your other foot. The e-scooter should be sitting in front...
-
Page 10: Fcc Compliance
F C C C O M P L I A N C E Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 11: Warranty
Prior to purchasing any motorized vehicle, we highly recommend that you research your local regulations and country-specific laws. Ultimately, you are responsible for complying with all applicable laws and regulations. Voyager waives all liability relating to your use of Voyager products.