Table of Contents
Advertisement
Quick Links
This manual was downloaded at: www.sdsdrives.com
+44 (0)117 938 1800
This option contains ESD (Electrostatic Discharge) sensitive parts. Observe static control
WARNING!
Disconnect all sources of power before attempting installation. Injury or death
could result from unintended actuation of controlled equipment.
This option contains ESD (Electrostatic Discharge) sensitive parts. Observe static control
precautions when handling, installing and servicing this option.
Figure 1 Installing the HTTL Speed Feedback Technology Box Option
Figure 1 Installing the HTTL Speed Feedback
(605C illustrated)
Technology Box Option (605C illustrated)
1. Unpack and handle the Option using correct static safety procedures.
2. Remove the inverter terminal cover and securing screws.
3. Carefully plug the Option into the left-hand port (as illustrated above) ensuring correct
alignment of the connector and tighten the earthing screw. You can operate the Inverter with
the Speed Feedback and/or a Communications Technology Box, but you cannot use two
options of the same kind.
1.
Unpack and handle the Option using correct static safety procedures.
2.
Remove the inverter terminal cover and securing screws.
3.
Carefully plug the Option into the left-hand port (as illustrated above) ensuring correct alignment of the connector and
tighten the earthing screw. You can operate the Inverter with the Speed Feedback and/or a Communications Technology
Box, but you cannot use two options of the same kind.
formerly
PART NUMBER:
Disconnect all sources of power before attempting installation. Injury or death
could result from unintended actuation of controlled equipment.
precautions when handling, installing and servicing this option.
Used on :
Caution
earthing screw
HTTL Speed Feedback Technology Box
then
Unit 6, St Martin's Park
Moorend Farm Avenue
Cabot Park, Avonmouth
Bristol, BS11 0RS
6054-HTTL-00
WARNING!
Caution
605C, 690+ Frames C-K
now
Tel: +44 (0)1179 381800
Fax: +44 (0)1179 381801
Email: info@sdsdrives.com
Web: www.sdsdrives.com
Advertisement
Table of Contents
Summary of Contents for Eurotherm Parker SDS Drives 6054-HTTL-00
- Page 1 Unit 6, St Martin’s Park Tel: +44 (0)1179 381800 Moorend Farm Avenue Fax: +44 (0)1179 381801 Cabot Park, Avonmouth Email: info@sdsdrives.com Bristol, BS11 0RS Web: www.sdsdrives.com PART NUMBER: 6054-HTTL-00 WARNING! Disconnect all sources of power before attempting installation. Injury or death could result from unintended actuation of controlled equipment.
- Page 2 Unit 6, St Martin’s Park Tel: +44 (0)1179 381800 Moorend Farm Avenue Fax: +44 (0)1179 381801 This manual was downloaded at: www.sdsdrives.com Cabot Park, Avonmouth Email: info@sdsdrives.com +44 (0)117 938 1800 Bristol, BS11 0RS Web: www.sdsdrives.com This manual was downloaded at: www.sdsdrives.com This manual was downloaded at: www.sdsdrives.com +44 (0)117 938 1800 DIP Switch Settings...
- Page 3 This manual was downloaded at: www.sdsdrives.com +44 (0)117 938 1800 Unit 6, St Martin’s Park Tel: +44 (0)1179 381800 Installing the Inverter Moorend Farm Avenue Fax: +44 (0)1179 381801 Cabot Park, Avonmouth Email: info@sdsdrives.com Bristol, BS11 0RS Web: www.sdsdrives.com NSTALLING THE NVERTER IMPORTANT: Read Chapter 12: “Certification for the Inverter”...
- Page 4 This manual was downloaded at: www.sdsdrives.com Unit 6, St Martin’s Park Tel: +44 (0)1179 381800 +44 (0)117 938 1800 Moorend Farm Avenue Fax: +44 (0)1179 381801 Cabot Park, Avonmouth Email: info@sdsdrives.com Installing the Drive Bristol, BS11 0RS Web: www.sdsdrives.com NSTALLING THE RIVE Chapter 3 690+ Frames C-K Size Guide...
Need help?
Do you have a question about the Parker SDS Drives 6054-HTTL-00 and is the answer not in the manual?
Questions and answers