Download Print this page

Pelonis PSH700 Owner's Manual page 4

Turbo fan heater

Advertisement

OPERATING INSTRUCTIONS
Pilot light
Safty grill
● Check before turning on the machine
1. Check if the power wire is under good condition.
2. The product adopts 120V 60Hz AC power supply, before use, please confirm if the rated current of
the power socket meets the local requirements with safe grounding device, otherwise, please
replace it with the qualified socket.
● Put the machine on the flat place
Uneven place may possibly cause the turnover switch at abnormal position, then the heater
can't work after turning on, therefore, please put the heater on the flat place, at least the surface
below the base of the heater must be flat.
● Power Switch Knob
Turn the Power selection knob to select between 4 functions: (Heat) 900W LOW, (Heat) 1500W HIGH,
(Fan) LOW, (Fan) HIGH.
● Turn off the Heater
A. Turn the Power Switch Knob to OFF position.
B. Remove the power plug, store the heater after the entire machine has become cool.
● Safety Protection
1.Overheat protection:This heater includes an Overheat Protection System that shuts the unit off if it
overheats due to abnormal conditions. If this occurs turn the heater "OFF", unplug it, and inspect and
remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, plug it back in,
and resume normal operation.
2.Inversion protection: When the whole heater is inverted, the safety system will
automatically cut off the power, and return to the work state before inversion after
the body is placed upright.
Power selection knob
(Heat)LOW
(Heat)HIGH
3
OFF
(Fan)LOW
(Fan)HIGH

Advertisement

loading