Home Accents Holiday TG70P3937S01 Quick Start Manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should
always be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. This product is for indoor use only. The electrical rating is
1.53A 120V 60Hz.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach
it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten-
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any mate-
rial that is not a part of the product when in use.
m.Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE INSTRUCTIONS
n.
Pre-Assembly
Package Contents
Part Description
A Tree top, tag 3
B Tree center, tag 2
C Tree bottom, tag 1
D Tree stand
Assembly
Assembling the tree stand
Step 1.Choose a location near a wall outlet.
Step 2.Unfold the legs of the tree stand (D) and lay the stand
on the floor.
Step 3.Slide the locking disk of the tree stand (D) down until
it snaps into place.
Assembling the tree
Step 1.Remove the protective caps from the tree bottom (C)
and insert the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B)
and insert the pole into the tree bottom (C) .
Step 3.Insert the tree top (A) into the tree center (B).
Step 4.Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 5.Connect the plug(s) securely to the extension cord(s)
as per the color labels indicated in attached photo
and insert the green label extension cord plug into
the wall outlet.
Step 6.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Quantity
1
1
1
1
Section 1
Model# TG70P3937S01
Sku # 1000 834 599
Section 3
S100
S100
Section 2 S100
S100
S50
Foot Pedal
on/off Switch
Christmas Tree
Click
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Insert
Green Label
Plug Into Wall
Outlet