Celebrations Home JACKSON TG66EH148X07 Quick Start Manual

Before You Begin
PART DESCRIPTION
A TREE - TOP
B TREE - CENTER, STICKER 2
C TREE - BOTTOM, STICKER 1
Assembly / Operation Instructions
ASSEMBLING THE TREE STAND
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the stand on the floor.
Step 3. Slide the locking disk of the tree stand (D) down until it snaps into place.
ASSEMBLING THE TREE
Step 1. Remove the protective caps from the tree bottom and insert the pole into
the tree stand.
Step 2. Continue by inserting the upper tree section(s) to the lower section(s)
until inserting the tree top.
Step 3. Shape the branches to your preference by working from the bottom to
the top. When adjusting branches, ensure that all wires are free of
branch hinges.
Step 4. Shape the tree from the bottom to the top. Start with the branches
farthest from the pole – fan out in a star shape, and continue until
the entire tree is shaped.
Top view
Step 5. This is a Simple Shape tree and no shaping is required. Just slightly
®
upsweep and shift branches to fill in any gaps for a fuller, uniform look.
Your Christmas tree is now ready to be decorated.
REPAIRING LOOSE HINGES
Step 1. Place the branch into the slot of
the bracket.
Step 2. Insert a new hinge pin through
the holes of the bracket and
secure with a washer.
6.5 ft UNLIT JACKSON TREE
QUANITY
1
1
1
Side view
PART DESCRIPTION
D TREE STAND
E SPARE PARTS PACKET
(FOR INDOOR USE ONLY)
Tree Top
Section 2
Section 1
9016938
QUANITY
1
1
Click