Advertisement
BATTERY RGB LED INDICATION
When plugging in jack cable, the touch pad will automatically indicate the
battery level by blinking blue or red LED lights on both ends of the pad three
times.
Blue blinking means "ready to play"
Red blinking indicates low battery status below 10%
SLEEP MODE
Battery is only used when a jack wire is plugged into the guitar. In order
to save battery power when plugged in, a motion detector activates sleep
mode after three minutes of complete non-movement.
As soon as the guitar is being picked up again, the Touch Pad System
awakes immediately.
TRUE BYPASS MODE
When battery is too low to power the
Touch Control System, the guitar will
automatically switch to bypass mode.
bypass pickup selector
With the
circuit board on the inside of the guitar, you
can select which pickup is active during by-
pass mode. Left activates bridge, right
activates neck pickup. During bypass mode,
only one pickup can be active.
on the
Page 3/5
Advertisement
