Advertisement
Quick Links
FT Series
Fans
Assembly of Fan Pedestal onto Fan Base:
• Insert the pedestal onto the base press the pedestal firmly into position in the base.
• Finally, locate in screws provided in the underside of the base and tighten firmly to secure the pedestal and base permanently
together.
Table Fan Operating Instruction:
Instructions for Safe Operation:
• Never insert fingers, pencils, or any other object through the guard when fan is
running.
• Disconnect fan when moving from one location to another.
• Disconnect fan when removing grilles for cleaning.
• Be sure fan is on a stable surface when operating to avoid overturning.
• Do not use close to an open window. Rain may create electrical hazard.
Page 1
21/06/06 V1.0
Advertisement
Summary of Contents for PRO POWER FT Series
- Page 1 FT Series Fans Table Fan Operating Instruction: Instructions for Safe Operation: • Never insert fingers, pencils, or any other object through the guard when fan is running. • Disconnect fan when moving from one location to another. • Disconnect fan when removing grilles for cleaning.
- Page 2 FT Series Fans Assembly of Blade and Grilles: • Unscrew the spinner clockwise and the nut counter clockwise then remove both of them with the plastic sleeve around motor shaft. • Set the rear grille in the proper position with handle facing upwards.
- Page 3 FT Series Fans Notes: International Sales Offices: AUSTRALIA FINLAND NETHERLANDS – Farnell InOne – Farnell InOne – Farnell InOne SWITZERLAND – Farnell InOne Tel No: ++ 61 2 9645 8888 Tel No: ++ 358 9 560 7780 Tel No: ++ 31 30 241 7373...