TOGOAL GET06A-US Manual

TOGOAL
Digital Timer Outlet
Model No.:GET06A-US
Questions or Concerns? enoverus@foxmail.com
Safety Use & Care
Please keep this manual in a safe place for future reference.
DO NOT plug any appliance where the load exceeds 15Amps.
Heaters, pet feeders and similar appliances should never be
left unattended during operation. The manufacturer recommends
such appliances not be connected to timers.
DO NOT attempt to repair, disassemble or modify under any
circumstances.
FAQ
1. How long is the warranty for this product?
We offer a 12-month limited warranty on this timer. If your timer is
broken, please email your order number and describe the issue. We
will immediately issue a full refund or arrange a new replacement after
verification. We believe what makes us different is not just the product
we offer but also our outstanding customer service. We also believe
the buyer and seller can achieve a win-win outcome through mutual
effective communication.
2. What should I do if I am having trouble setting up the timer?
Please email to tell us the schedule and days of the week you want to
set up. Our technical support team will give you personal step-by-step
guidance illustrated with pictures.
1. Initial Setup
First Time Set Up
Press the reset button (R). The screen will turn blank,then will show
the reset display.
Tips:
If the screen is blank, plug the timer into any outlet for 30
minutes to charge the internal battery.
2. Set the Digital Clock
When in the clock mode, press the
'MODE' button for once, the screen will
show AUTO, day, hour and minute. As
shown in "Figure 1".
For example, set the time as 9:30AM Tuesday
While holding the
'CLOCK' button down
press the 'WEEK'
button to adjust the
day to TU.
While holding the 'CLOCK'
button down press the
'HOUR' button to adjust
the hour digits to 9 .
While holding the 'CLOCK'
button down press the
'MlN' button to adjust the
minute digits to 30.
3. Daylight Saving Time
To switch between Standard Time and Daylight-Saving Time
(DST),press and hold the 'CLOCK' button for 3s. An 'S' will
appear on the screen and the clock will increase by 1
hour when in DST. As shown in 'Figure 2'.
Figure 2
4. Set the Timer
Press the 'PROG' button to enter the setting mode:
You will see 1
For example, if you want to have the timer to come on at 8:30AM
and go off at 22:30 Monday thru Friday, please do the following:
Step 1: Press the
'WEEK'button to choose
the group of days you
wish to switch the
appliance on.
The group will advance in the sequence of:
MO -> TU -> WE -> TH -> FR -> SA -> SU ->MO WE
FR -> TU TH SA -> SA SU -> MO TU WE -> TH FR SA
Figure 1
-> MO TU WE TH FR -> MO TU WE TH FR SA -> MO
TU WE TH FR SA SU.
Figure 3
ON
to the left of the display as shown in 'Figure 3'.
Step 2: Press the 'HOUR'
button to adjust the hour.
Step 3: Press the 'MIN'
button to adjust the minute.
Step 4: Press the 'PROG'
button to set 1 time.
OFF
Repeat steps 1 - 3.
(Note:Do not forget to
press the 'WEEK' button
to select the desired days
for the off time, or the timer
may not go off as you
want.)
Step 5: Press the 'PROG'
button to advance to the
next on/off setting
position. Repeat steps 1-4
to set more timers
according to your needs.
Step 6: Press the
'CLOCK' button to exit
the setting mode and
plug the timer into a
powered outlet. The
timer is ready for use.
* Tips: To review the programs, press the 'PROG' button
repeatedly. You can use the 'DEL' button to cancel the settings
you don't want, or press it one more time to restore.
IMPORTANT
• At the moment the timer is plugged into an outlet, the timer
may not come on immediately as per the setting if the digital
clock time falls between any on-off interval you set. Instead it
will stay off until the next on-off interval begins. For instance,
if you plug the timer into the outlet between 8:30~22:30, the
timer may not come on immediately even if you have set the
timer to come on at 8:30 every morning and go off at 22:30
every evening. Instead, it will stay off until 8:30am next
morning. Under this circumstance, if you want to have the
timer come on the moment it is plugged in and then work as
your program, please press the 'MODE' button repeatedly to
manually turn on the timer first and then press the button one
more time to put the screen back to AUTO.