Montage Quick-Lock Flex; Positioning The Flex Sleeve - UHRIG Quick-Lock Flex Series User Manual

3.3. Installing the Quick-Lock Flex
3.3.1. Positioning the Quick-Lock Flex sleeve on the packer
Fitting the wheels
Select the correct set of wheels for the pipe's
nominal diameter
(see Appendix 1).
OR
Set packer to nominal width
If using a packer with an adjustable chassis:
• Set the adjustable chassis of the packer to
the nominal width of the host pipe.
(See also instructions "Offset packer with
adjustable chassis" 3.4, Appendix 4 of the
Quick-Lock Manual).
Aligning the sleeve on the packer
• The sleeve should usually be positioned
on the packer while it is in the manhole.
• Position the Quick-Lock Flex sleeve
on the packer so that it is flush with the
front of the packer.
8